Remove all entries from the directory – AT&T 1070 User Manual

Page 35

Advertising

Directory

Remove all entries from the directory

1. Press

[DIR] to begin working with the directory.

2. Press

[ENTER] to select VIEW ENTRIES.

3. Press

[ ] or [ ] until the screen shows END OF

LIST.

4. Press

[REMOVE]. The screen display include

REMOVE ALL?

5. Press

[REMOVE] again within three seconds to

confirm the command and remove all directory
entries. The screen will display

ALL REMOVED!

NOTE: Once the entries are removed from the

directory, they cannot be restored.

To save an entry to a one-touch key

1. Find the entry for the desired number by

following the directions under

Review

directory entries on page 46.

2. Press

[ENTER] then [ ] or [ ] until you see

COPY TO 1-TOUCH.

3. Press

[ENTER] to begin to save the number.

4. Press the one-touch button fo the location

where you want to save the number.

-OR-

Press

[LOWER], then press the one-touch

button.

5. The screen automatically returns to the

directory record just reviewed.

6. Press

[DIR] to exit.

NOTE: If the desired one-touch key location

was empty, the screen will display

SAVED! If there

is a telephone number in it, the screen will display
REPLACE SPD#XX? (XX is the desired one-touch
location number.) You can replace the current
entry by pressing

[ENTER], or keep the current

entry by pressing

[ ] or [ ] until you see NO

REPLACE? Press [ENTER], then choose another
one-touch key location.