Ronbow Metal Feet - Manual

Rev. NOv, 2013 ronbow.com INSTALLATION GUIDe
INSTALLATION SHeeT ACCESSORIES MODEL: 705001
705002
705003
MEtAL fEEt
MATERIALS NEEDED:
(4) nails
hammer
PhilliPs screwdriver
MATERIAL PROVIDED:
(4) metal feet
(4) screws
705005
705006
705008
705009
705067
Figure 1. STEP 1: Optional metal feet are installed on the
bottom of the vanity legs. It will add extra height to the
vanity.
See Figure 1.
Figure 2. STEP 2: Place the metal feet flush against the bottom
of the leg and tighten the screw provided.
See Figure 2.
Figure 3. STEP 3: It is recommended to nail the corner of the
metal feet to prevent the feet from coming loose.
See Figure 3.
STEP 4: Repeat steps 2 and 3 to install the set of
metal feet.
metal feet
BOttOm Of
the leG
BOttOm Of
the leG
metal feet
metal feet