Red Lion PSAC - INDUCTIVE, STAINLESS STEEL CASE - Manual

DESCRIPTION
The PSAC offers a NPN Open Collector output that is compatible with most
Red Lion Controls’ Motion Monitors, Counters, and Controls. This sensor has a
maximum sensing distance of 0.059" (1.5 mm) and can detect ferrous and non-
ferrous metal targets from zero speed to 5 KHz.
The 0.25" diameter pole piece is epoxy encapsulated in a stainless steel case
measuring 0.75" Dia. x 3.5" L and is supplied with a 10, 25 or 50 ft., 3-wire,
cable. Overall dimensions, including the neoprene strain-relief boot are 0.90"
Dia. x 4.5" L. Operating temperature range is -25 ° to +70 °C.
SPECIFICATIONS
1. SUPPLY VOLTAGE: +10 - 30 VDC @ 20 mA max.; Unit is not Reverse
Polarity Protected.
2. MAXIMUM SWITCHING FREQUENCY: 5 KHz
3. OUTPUT: NPN Open Collector Transistor;
V
OH
= 30 VDC max.; V
OL
= 1 V max @ 150 mA.
4. MAXIMUM SENSING DISTANCE: 0.059" (1.5 mm)
5. OUTPUT CABLE: Integrally potted 10, 25, or 50 feet ± 6 inches; PUR
jacketed 3-wire 24 AWG conductors.
BROWN = +VDC, BLUE = Common, BLACK = NPN O.C. Output
6. OPERATING TEMPERATURE RANGE: -25 °C to +70 °C (-13 °F to
+158 °F)
7. CONSTRUCTION: Epoxy Encapsulated 0.25" dia. sensor in 0.750"
±0.005" dia. #304 stainless steel case.
PSAC APPLICATION
PSAC application depends on the size, material, and spacing of the targets
being sensed and the sensing distance that can be maintained. The maximum
sensing distance is defined as that distance where the sensor is just close enough
to detect a ferrous target whose diameter is equal to or greater than the sensor
diameter. For the PSAC, the internally potted sensor diameter is 0.25". In an
actual application the sensing distance should be between 50-70% of the
maximum to assure reliable detection. For target sizes smaller than the 0.25"
sensor diameter, the maximum sensing distance can be estimated from the curve
in Fig. 2. A further reduction factor must also be applied if the target material is
a non-ferrous metal as shown in Fig. 3.
Ideally, spacing between adjacent targets should be at least 0.25" so that the
first target completely leaves the sensors’ viewing field before the next target
appears. Individual targets can still be resolved as separate objects if this
spacing is reduced to 70 or 75% of the sensor diameter, however this can
introduce a minimum limit on sensing distance that makes adjustment a bit more
critical
The PSAC is internally shielded which allows the sensor face to be flush
mounted in metal applications without reducing sensing distance.
MODEL PSAC - 3-WIRE INDUCTIVE PROXIMITY SENSOR WITH
CURRENT SINK OUTPUT
Reduction in the max. sensing distance
due to decrease in diameter of ferrous
targets.
Figure 2
Typical reduction factors for various
nonferrous targets with diameters equal to
or greater than sensor diameter.
Figure 3
MAXIMUM SENSING DISTANCE REDUCTION FACTORS
0 .25 .5 .75 1
0
50
100
% OF MAX. SENSING DISTANCE
RATIO,
SENSOR DIAMETER
TARGET DIAMETER
100%
APPROX. 75%
APPROX. 40%
APPROX. 35%
APPROX. 30%
MILD STEEL
STAINLESS
ALUMINUM
BRASS
COPPER
STEEL
MATERIAL % SENSING DISTANCE
Bulletin No. PROX-J
Drawing No. LP0019
Released 03/13
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion.net

SENSE FERROUS AND NON-FERROUS METAL OBJECTS

OPERATES FROM ZERO TO 5 KHZ PULSE OUTPUT RATE

SENSES TARGETS AS SMALL AS 12 D.P. GEAR TEETH

IDEAL FOR TACHOMETER, COUNTER AND CONTROL INPUT
BROWN
BLACK
BLUE
10-30VDC @ 20mA
OUTPUT:
150mA MAX @ V = 1V OL
COMMON
+30V MAX @ 0mA
OSCILLATO
R
CIRCUIT
MAXIMUM SENSING DISTANCE
(SEE INFORMATION AT RIGHT
ON SENSING DISTANCE)
SENSING TARGET
.059
(1.5)
Figure 1
4.5 (114.3)
3.5 (88.9)
.750±.005 DIA.
304 S.S. CASE
FLUSH MOUNT
.25 DIA.
POLE PIECE
NEOPRENE STRAIN
RELIEF BOOT
.9 (22.9) DIA.
10 FT. 3-WIRE CABLE
INTEGRALLY POTTED
WIRE COLOR CODE
BROWN = +VDC
BLUE = COMMON
BLACK = NPN O.C. OUTPUT
DIMENSIONS In inches (mm)
PSAC
ORDERING INFORMATION
MODEL NO. DESCRIPTION PART NUMBER
PSAC
NPN O.C. Proximity Sensor, 10 ft. Cable PSAC0000
NPN O.C. Proximity Sensor, 25 ft. Cable PSAC0025
NPN O.C. Proximity Sensor, 50 ft. Cable PSAC0050
Block Mount for 3/4" Cylindrical Sensors 5400100
Steel Plug Mount 5403701
Stainless Steel Plug Mount 5403702
Do not dispose of unit in trash - Recycle