Red Lion PSAH - HALL EFFECT - Manual


DETECTS STEEL SENSING GEARS OR OTHER FERROUS
TARGETS

NPN OPEN COLLECTOR OUTPUT

OPERATES FROM 0 TO 10 KHz

IDEAL FOR RATE APPLICATIONS
MODEL PSAH - HALL EFFECT SPEED SENSOR
4.5 (114.3)
3.5 (88.9)
0.750±.005 DIA.
304 S.S. CASE
FLUSH MOUNT
0.25 DIA.
POLE PIECE
NEOPRENE STRAIN
RELIEF BOOT
0.9 (22.9) DIA.
10 FT. 3-WIRE CABLE
INTEGRALLY POTTED
WIRE COLOR CODE
RED = +VDC
BLACK = COMMON
WHITE = NPN O.C. OUTPUT
DIMENSIONS In inches (mm)
DESCRIPTION
The Hall Effect speed sensor (PSAH) is ideal for sensing steel gears or other
ferrous targets from 0 to 10 KHz. This sensor does not have a minimum
threshold speed as does a magnetic pickup sensor. However, when the sensor is
first powered up, the output state is indeterminate (Hi or Lo) when the sensor is
not detecting metal. The unit operates from a +8 to +30 VDC power supply and
is reverse polarity protected. The sensor face can be mounted flush into metal
panels. The case is stainless steel and is supplied with 10 feet (3 M) of cable.
The stranded shield wire is not connected to the sensor circuit or case.
SPECIFICATIONS
1. POWER SUPPLY: +8 to +30 VDC @ 30 mA max.; reverse polarity
protected.
2. MAXIMUM SENSING DISTANCE: 0.040" (1 mm).
3. OUTPUT: NPN O.C. transistor; V
MAX
= 30 VDC; V
SAT
= 1 V
MAX
@ 30
mA max. load.
4. OPERATING FREQUENCY: 0 to 10 KHz.
5. OPERATING TEMPERATURE RANGE: -25°C to 70°C
(-14 °F to 158 °F).
6. OUTPUT CABLE: Integrally potted 10 ft PVC jacketed, 3 wire, 22 AWG
conductors, with stranded shield wire and 100% foil coverage; grey PVC
jacket.
Color Code: Red (+VDC), Black (Comm.), White (NPN OC Output).
7. CONSTRUCTION: Epoxy encapsulated 0.297 sensor in 0.75" ±0.005" dia.
#304 stainless steel case.
TARGET SIZE
The PSAH can detect gears as small as 24 D.P. or other ferrous targets with
equal or greater dimensions. The sensor is compatible with all Red Lion
Controls Sensing Gears.
3/4" DIAMETER CYLINDRICAL SENSOR MOUNTING
The PSAH and other Red Lion Controls 3/4" dia. cylindrical pickups may be
easily mounted using Model 5400100 Block Mount (see diagram below). This
machined block of solid
aluminum provides for
rigid mounting using the
two included #8-32 x 1/2"
screws. The single screw
split-clamp design allows
for easy adjustment of the
airgap and locks the unit
securely without
deforming the case.
+VDC (RED)
O.C. OUTPUT (WHITE)
COMMON (BLACK)
SHIELD WIRE
N/C
+12VDC
COUNT
COMMON
PSAH
LO FRQ. SRC. MAG
.
HI
SNK.
LOGIC
*
TYPICAL COUNTER
DIP SWITCH SET-UP
* APPLICATION
DEPENDENT
Bulletin No. PSAH-B
Drawing No. LP0675
Released 03/13
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion.net
ORDERING INFORMATION
MODEL NO. DESCRIPTION PART NUMBER
PSAH NPN O.C. Hall Effect Sensor PSAH0000
BM Block Mount 5400100
PSAH
.625
1.00
(25.4)
.50
(12.7)
.25
(6.4) (15.9)
.187
(4.8)
#8-32 THD.
.25" (6.4) MIN.
.875
(22.2)
1.625
(41.3)
SENSOR
For 3/4" cylindrical sensors
Qty. 2 #8-32 x 1/2 " Mounting screws included
P/N 5400100
Block Mount
Red Lion Controls
Headquarters
20 Willow Springs Circle
York PA 17406
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
Red Lion Controls
China
Unit 302, XinAn Plaza
Building 13, No.99 Tianzhou Road
ShangHai, P.R. China 200223
Tel +86 21 6113 3688
Fax +86 21 6113 3683
Red Lion Controls
Europe
Softwareweg 9
NL - 3821 BN Amersfoort
Tel +31 (0) 334 723 225
Fax +31 (0) 334 893 793
Red Lion Controls
India
201-B, 2nd Floor, Park Centra
Opp 32 Mile Stone, Sector-30
Gurgaon-122002 Haryana, India
Tel +91 984 487 0503
Do not dispose of unit in trash - Recycle