American Standard 1662.601 - Manual

F99
© 2008 AS America Inc.
SHOWER SYSTEMS
SHOWER SYSTEM KIT
PRODUCT FEATURES:
VALVE: Cast Brass Valve Body: Durable.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance.
Colony Pressure Balancing Valve Cartridge:
Maintains constant output temperature in response to
changes in hot and cold supply pressure.
Back-to-Back Capability: Hot and cold can be reversed
quickly and easily.
Adjustable Hot Limit Safety Stop: Limits the amount of
hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Integral Plaster Guard and Mounting Plate: Protects
valve during installation and serves as a mounting plate for
thin-wall installations.
PERSONAL SHOWER:
Lightweight, Ergonomic Design:
For a sure grip even
with wet, soapy hands.
SLIDE BAR: Simple Height Adjustment: Allows
positioning of the personal shower anywhere along the bar.
MODEL NUMBER:
1662.601 Shower System Kit
Includes:
SUGGESTED SPECIFICATION:
Shower system shall feature a wall supply with 1/2" NPT female inlets, 1/2" NPSM male outlet, 59" hose, personal shower and a 25"
Standard Slide Bar. Pressure Balance valve shall feature a cast brass body. Shall feature ceramic disc valve cartridge which is capable of
back-to-back installation. Shall also feature hot limit safety stop. Fitting shall be American Standard Model # 1662.601.002.
GENERAL DESCRIPTION:
Complete personal shower system includes: a Colony
pressure balance valve, a wall supply with 1/2" NPT female
inlet and 1/2" NPSM male outlet; a 59" (1500mm) shower
hose; a “Fixed” personal shower; and a 25" Slide Bar. Valve
features a cast brass body, washerless ceramic disc valve
cartridge with back-to-back capability and hot limit safety stop.
Cycles from off to hot through cold. Exclusive Colony
pressure balancing cartridge maintains constant output
temperature in response to changes in relative hot and cold
supply pressure. One-half inch direct sweat inlets and outlets.
With screwdriver stops. Durable metal handle provides easy,
certain control for all users. Rough-in plaster guard designed
for use as thin-wall mounting adaptor. Fixed handshower with
2.5 gpm/9.5L/min. flow restrictor. Slide bar features an
adjustable shower holder which can be set at any height or
position along the bar and angle up to 45˚.
CODES AND STANDARDS
Install as required to comply with local code
requirements.
ASME A112.18.1
ASSE 1016
ANSI A117.1
32mm
(1-1/4)
13mm
(1/2)
1/2" NPT
1829mm (72) to 1990mm (78)
(OPTIONAL)TO FINISHED FLOOR
RUBBER GASKET
FINISHED WALL
1/2" NPSM HOSE
CONNECTION
1371SS.240
1660.505
8888.035
8888.037
1660.225
1660.400
• Colony Pressure Balance Valve w/stops
• Fixed Handshower
• Hose
• Wall Supply
• Standard Slide Bar
• In-line Vacuum Breaker
1662.601
Product
Number
Description
Shower System Kit. Contains pressure balace valve,
“Fixed” handshower, hose, wall supply and slide bar.
Finish
Polished
Chrome
002
53mm
(2-1/16)
146mm
(5-3/4)
67mm
(2-5/8)
1/2" NPSM
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0
1
2
3
Shower
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
100 80 60 40 20
5/8 O.D. FOR
1/2 NOM.
COPPER
SWEAT
ALL
CONNECTIONS
51mm
(2)
INLETS
149mm
(5-7/8)
51mm
(2)
SWEAT
INLETS
w/STOPS
"SEE
ILLUSTRATION
BELOW"
6"
171mm
(6-3/4)
600mm
(23-5/8)
549mm
(21-5/8)
86mm
(3-3/8)
65mm
(2-1/2)
82mm
(3-1/4)
45mm
(1-3/4)
127mm
(5)
24mm
(1)