Red Lion APS - Manual

17
16
15
14
13
12
11
10
100 200 300 400
OUTPUT D.C. CURRENT (MA)
OUTPU
T
D.C. VO
LT
S
115VAC 50/60 HZ INPUT
PROVIDES . . .

+12 VDC “HELPER” SUPPLY FOR LOAD SHARING WITH
UNREGULATED COUNTER SYSTEMS WITH UNUSUAL SENSOR
AND ACCESSORY LOADS, OR . . .

“STAND-ALONE” APPLICATIONS FOR POWERING SENSORS
AND ACCESSORIES
MODEL APS - OCTAL PLUG-IN ACCESSORY POWER SUPPLY
TO OTHER
COUNTERS
MODEL APS01
COMMON
+12V
115VAC
50/60HZ
1 8
7 2
3
4 5
6
TYPICAL CONNECTION DIAGRAM
2.38 (60.5)
1.75
(44.5)
2.90
(73.7)
SEATED
HEIGHT
ABOVE
SOCKET
KEY
DIMENSIONS In inches (mm)
OUTPUT VOLTS/CURRENT REGULATION CURVE
ORDERING INFORMATION
MODEL NO. DESCRIPTION PART NUMBER
APS01 115 VAC Accessory Power Supply APS01000
SKT1 Base Mount 8-pin Octal Socket SKT10000
-- DIN Rail 8-pin Socket SKTDIN00
Bulletin No. APS-G
Drawing No. LP0042
Released 05/13
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion.net
DESCRIPTION
The Model APS is an unregulated +12 VDC supply designed to load share
when connected in parallel with internal power supplies of many Red Lion
Controls Counters and Rate Indicators. It can also be used as a general purpose
“Stand-alone” power supply to power other control circuits, sensors and
accessories. The APS is designed for 115 VAC ±10%, 50/60 Hz primary
supply. Operating temperature range is -20° to +50°C. Output current is per
regulation curve.