Red Lion PAXCDC4 (MODBUS) - Manual (Page 4)

HOLDING REGISTERS
* See Coil Table for register mapping and Coil Descriptions for functionality.
Notes:
1. Any registers marked with “——” are unused and will return a value of HEX <8000>.
2. If a value larger than 4095 is written to the AOR register, 4095 will be loaded.
3. TRX delay is the minimum time from the reception of the last character in the
MODBUS Query until the response is started. The minimum delay value is equal to
2 character times (2 msec min.). The user can increase the delay time by writing to the TRX Delay register. Any value written to the TRX Delay register that is
less than the value calculated at power up will be ignored. The TRX Delay value is stored in E
2 PROM memory. On power-up, the calculated value is compared to
the value read back from the E 2 PROM. The greater of the 2 values will be used as the TRX Delay value and will be written to the TRX Delay register.
4. Numeric data is limited to value -19999 to 99999.
5. Numeric data is limited to the value listed for that parameter according to the meter’s literature.
4
Values less than 65,535 will be in (LO word). Values greater than 65,535 will continue into (HI word). Negative values are represented by two’s complement of the
combined (HI word) and (LO word).
HOLDING
REGISTER
PAX 4 PAXI 5 PAXCK/PAXTM 5 PAXDR 5
ACCESS ACCESS ACCESS
40001: Input (HI) Read Only CTA (HI) Timer (HI) Read/Write Rate A (HI) Read Only
40002: Input (LO) Read Only CTA (LO) Timer (LO) Read/Write Rate A (LO) Read Only
40003: Total (HI) Read Only CTB (HI) Counter (HI) Read/Write Rate B (HI) Read Only
40004: Total (LO) Read Only CTB (LO) Counter (LO) Read/Write Rate B (LO) Read Only
40005: Min (HI) Read Only CTC (HI) RTC Time (HI) Read/Write Rate C (HI) Read Only
40006: Min (LO) Read Only CTC (LO) RTC Time (LO) Read/Write Rate C (LO) Read Only
40007: Max (HI) Read Only RTE (HI) RTC Date (HI) Read/Write Total A (HI) Read/Write
40008: Max (LO) Read Only RTE (LO) RTC Date (LO) Read/Write Total A (LO) Read/Write
40009: SP1 (HI) Read/Write Min (HI) SP1 (HI) Read/Write Total B (HI) Read/Write
40010: SP1 (LO) Read/Write Min (LO) SP1 (LO) Read/Write Total B (LO) Read/Write
40011: SP2 (HI) Read/Write Max (HI) SP2 (HI) Read/Write Total C (HI) Read/Reset
40012: SP2 (LO) Read/Write Max (LO) SP2 (LO) Read/Write Total C (LO) Read/Reset
40013: SP3 (HI) Read/Write SFA (HI) SP3 (HI) Read/Write SFA (HI) Read/Write
40014: SP3 (LO) Read/Write SFA (LO) SP3 (LO) Read/Write SFA (LO) Read/Write
40015: SP4 (HI) Read/Write SFB (HI) SP4 (HI) Read/Write SFB (HI) Read/Write
40016: SP4 (LO) Read/Write SFB (LO) SP4 (LO) Read/Write SFB (LO) Read/Write
40017: Polling1 * Read/Write SFC (HI) SP1 Off (HI) Read/Write SFC (HI) Read/Write
40018: Reset * Read/Write SFC (LO) SP1 Off (LO) Read/Write SFC (LO) Read/Write
40019: TRX Delay 3 Read/Write LDA (HI) SP2 Off (HI) Read/Write LDA (HI) Read/Write
40020: AOR 2 Read/Write LDA (LO) SP2 Off (LO) Read/Write LDA (LO) Read/Write
40021: CSR Read/Write LDB (HI) SP3 Off (HI) Read/Write LDB (HI) Read/Write
40022: Terminate1 Read/Write LDB (LO) SP3 Off (LO) Read/Write LDB (LO) Read/Write
40023: LDC (HI) SP4 Off (HI) Read/Write
40024: LDC (LO) SP4 Off (LO) Read/Write
40025: SP1 (HI) Timer Start (HI) Read/Write SP1 (HI) Read/Write
40026: SP1 (LO) Timer Start (LO) Read/Write SP1 (LO) Read/Write
40027: SP2 (HI) Counter Start (HI) Read/Write SP2 (HI) Read/Write
40028: SP2 (LO) Counter Start (LO) Read/Write SP2 (LO) Read/Write
40029: SP3 (HI) Timer Stop (HI) Read/Write SP3 (HI) Read/Write
40030: SP3 (LO) Timer Stop (LO) Read/Write SP3 (LO) Read/Write
40031: SP4 (HI) Counter Stop (HI) Read/Write SP4 (HI) Read/Write
40032: SP4 (LO) Counter Stop (LO) Read/Write SP4 (LO) Read/Write
40033: Polling1 * Polling1 * Read/Write Polling1 * Read/Write
40034: Polling2 * Polling2 * Read/Write Polling2 * Read/Write
40035: TRX Delay 3 TRX Delay 3 Read/Write TRX Delay 3 Read/Write
40036: MMR MMR Read/Write MMR Read/Write
40037: AOR 2 RTC Day Read/Write AOR 2 Read/Write
40038: SOR SOR Read/Write SOR Read/Write
40039: Reset * Reset * Read/Write Reset * Read/Write
40040:
40041: Terminate1 Terminate1 Read/Write Terminate1 Read/Write
40042: Terminate2 Terminate2 Read/Write Terminate2 Read/Write