Akiles ProLam 100 - Manual

“PROLAM” OPERATIONAL MANUAL
▶
INSTRODUCTION:
CONGRATULATIONS ON THE PURCHASE OF YOUR NEW APL-100, A HEAVY DUTY POUCH LAMINATOR. YOUR
APL-100 WAS SPECIALLY DESIGNED WITH THE HIGHEST AVAILABLE TECHNOLOGY AND PREMIUM QUALITY
COMPONENTS TO RENDER YOU A HIGH QUALITY LAMINATION AS WELL AS MANY YEARS OF TROUBLE-FREE
SERVICE.
THE APL-100 CAN OPERATE WITH ANY STANDARD LAMINATING POUCH CURRENTLY IN THE MARKET. IT WAS
SPECIALLY DESIGNED TO OPERATE WITH OR WITHOUT A CARR|ER. NOTE: WE ONLY RECOMMEND THE USE
OF CARRIERS WITH INFERIOR QUALITY POUCHES (HIGH ADHESIVE COMPOSITION i.e. 10 MILS (4/6) POUCHES),
AS THEY MAY EXCRETE EXCESSIVE ADHESIVE, WHICH CAN POTENTIALLY DAMAGE THE SYSTEM.
IMPORTANT: WE RECOMMEND THAT YOU TAKE A FEW MINUTES TO FAMILIARIZE YOURSELF WITH THE
FUNCTIONS OF YOUR NEW APL-100. YOU WILL FIND OUT THAT WITH JUST A LITTLE PRACTICE, ANY
PERSON CAN ACHIEVE A PROFESSIONAL LAMINATION.
▶
OUTSIDE FEATURES:
▶
OPERATION:
· PLACE YOUR NEW APL-100 ON TOP OF A WORKING TABLE.
· PLUG POWER TO A GROUNDED 110V OUTLET (220V FOR CERTAIN COUNTRIES).
· PRESS THE POWER SWITCH TO THE ON POSTION (1). THE POWER LIGHT (3) WILL TURN ON INDICATING
THAT THE APL-100 HAS BEEN ACTIVATED.
· THE READY LIGHT (4) WILL TURN ON IN APPROXIMATELY 2-3 MINUTES, LETTING YOU KNOW THAT THE
APL-100 IS READY TO START LAMINATING.
· PRESS THE MOTOR BUTTON (2) TO THE ON POSITION.
· INTRODUCE THE DOCUMENT TO BE LAMINATED INTO THE POUCH.
· INTRODUCE THE POUCH (SEALED SIDE FIRST) INTO THE ENTRANCE (5) OF THE APL-100. *Remarks : When laminating small
pouches(with short-side less than 3” long) that do not require the use of carriers, insert your pouch with the short-side first, to make sure
it clears the gap between the front & back rollers.
· REMOVE THE POUCH FROM THE EXIT (6) OF THE APL-100.
· TURN “OFF” (1 & 2) THE PRO-LAM ONCE YOU ARE FINISHED LAMINATING.
· IMPORTANT : EACH UNIT HAS BEEN PRESET AT THE FACTORY AND REQUIRES NO ADJUSTMENTS TO LAMINATE OUR 7MIL
POUCHES.