Akiles UltraLam 250 - Manual (Page 2)

TEMPERATURE ADJUSTMENTS
TEMPERATURE CONTROL
ULTRALAM250P ULTRALAM250B
- IF THE POUCH IS NOT SEALING WELL (IT APPEARS MILKY), THE TEMPERATURE MAY BE TOO COLD
FOR THE POUCH THICKNESS THAT YOU WISH TO LAMINATE.
CORRECTIVE ACTION:
A. MAKE SURE THAT THE READY LIGHT IS ON.
B. IF THE READY LIGHT IS NOT ON, SIMPLY WAIT UNTIL THE READY LIGHT TURNS ON AND
PROCEED TO LAMINATE.
C. IF THE READY LIGHT IS ON, INCREASE THE TEMPERATURE (5) BY TURNING THE TEMPERATURE
CONTROL CLOCK-WISE (USE A FLAT-SCREW DRIVER FOR THE ULTRALAM 250B) WAIT
APPROXIMATELY 1-2 MINUTES UNTIL THE READY LIGHT TURNS ON AND THEN PROCEED TO
LAMINATE.
D. REPEAT STEP “C” AS NEEDED. NOTE: THERE ARE MANY DIFFERENT POUCHES IN THE MARKET
THAT MAY REQUIRE MORE OR LESS HEAT TO PROPERLY SEAL.
- IF THE POUCH IS WAVY THE TEMPERATURE IS TOO HIGH FOR THE POUCH THICKNESS THAT YOU
WISH TO LAMINATE
CORRECTIVE ACTION:
E. PROCEED WITH STEPS A, B, C AND D ABOVE. NOTE: TEMPERATURE CONT ROL MUST BE
TURNED COUNTER-CLOCK-WISE
C A U T I O N !
DO NOT LEAVE THE ULTRA-LAM ON FOR LONG PERIODS OF TIME, WHEN IN USE.
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT OPERATE THE ULTRA-LAM NEAR WATER
DO NOT USE THE ULTRA-LAM IF POWER CORD IS DAMAGED.
DO NOT ALLOW THE ELECT·RIC CORD TO BE IN CONTACT WITH HOT SURFACES.
IN CASE OF MALFUNCTION RETURN THE UNIT TO YOUR DISTRIBUTOR FOR SERVEE THIS
LAMINATOR DOES NOT CONTAIN ANY PART THAT CAN BE SERVEED BY THE CONSUMER.
WARRANTY POLICY:
YOUR ULTRA-LAM HAS A WARRANTY OF ONE YEAR FROMI|TS PURCHASE DATE. IN THE EVENT OF A
MANUFACTURERS DEFECT, YOUR DISTRIBUTOR (AT OPTION) WILL REPAIR OR REPLACE IT.
IMPORTANT: THIS WARRANTY DOES NOT COVER DAMAGES DUE IMPROPER USE OR MISS TREATMENT
OF THE UNIT INCLUD|NG ANY EXTRAORDINARY EVENT LEADING TO THE DAMAGE OF THE MACHINE
WHETHER IT IS REVERSIBLE OR NOT.
IF THE ULTRA-LAM IS NOT LAMINATING PROPERLY, FIRST FOLLOW THE CORRECT|VE ACTIONS ABOVE.
IF THE PROBLEM PERSISTS PLEASE CONTACT YOUR DEALER FOR FURTHER INSTRUCTIONS. PLEASE
HAVE YOUR MACHINES SERIAL NUMBER AND THE PURCHASE DATE READY. IF THE MACHINE MUST BE
RETURNED TO YOUR DISTRIBUTOR, IT IS YOUR RESPONSIBILITY TO PROPERLY PACK AND SHIP IT, AS
ANY DAMAGED INCURRED DURING ITS TRANSPORTATION IS NOT COVERED BY OUR WARRANTY
POLICY.
MODEL ULTRALAM-250B ULTRALAM-250P
THROAT CAPACITY 9.84” 9.84”
MOTOR HEAVY-DUTY HEAVY-DUTY
LAMINATING TEMP. RANGE 185 TO 320 ºF 185 TO 320 ºF
TEMPERATURE CONTROL ADJUSTABLE, BIMETAL ELECTRONIC
DIMENSIONS 17.5” X 9.5” 5.75” 17.5” X 9.5” 5.75”
WEIGHT 13.5 LBS. 13.5 LBS.
WARRANTY ONE YEAR ONE YEAR