American Acoustic Development THE CUB - Manual (Page 3)

Thank you for purchasing the AAD CUB Acoustic Guitar Amplifier. A
great deal of dedication and passion went into designing and building this
no compromise, high performance compact-combo amplifier. It was
conceived to be a dedicated amplifier for the “connoisseur” guitarist.
Reading this manual will enable you to get the best performance from it so that
you may enjoy many years of service.
READ THIS FIRST
• Before using the CUB please read ALL the instructions.
• On receipt of product, check for any signs of physical damage arising
from shipping. If any damage is visible contact your dealer.
• Keep all original packing.
• Never use this product in the vicinity of water. If the CUB were to get wet,
it could kill you by electrocution.
• Do not use this amplifier in a way that would compromise its ventilation
system. When operating, never cover the heatsink on rear panel.
• Do not locate this amplifier near any heat source.
• This amplifier must be connected only to a power source specified in this
manual.
• For safety do not leave the amplifier plugged into a power source for
long periods of time when not in use.
• Do not let any liquid or foreign objects fall into any openings on the
amplifier.
• Never use this amplifier if it has:
1. Suffered any physical damage.
2. Been subjected to any liquids, rain or moisture.
3. Damaged cables connected to it.
If any of the above occurs, the amplifier should be examined by
qualified service personnel.
• Always operate this amplifier with the correctly rated fuse.
• Never use this amplifier without proper grounding.
2