CDN PT1A - 4-Ev ENt Timer & Clock EN User Manual

Event timer & clock, Features, Battery installation

Advertising
background image

Features

4 channels

Programmable

Dual function

Memory

Counts up & down in 4 channels separately

or simultaneously

Clock

Stopwatch

Loud and long alarm

Individual channel sounds

Stop and restart

Counts up after zero

ABS plastic

Sliding mode switch

International time

4-way mounting: pocket clip/magnet/stand/loop

Battery and instructions included

Note:

Remove sticker from display before use.

Note:

In the following instructions, names of the control

buttons are shown in CAPS. Function information that appears

on the display is shown in

BOLD CAPS.

Battery Installation

Replace battery when LCD becomes dim or alarm

level declines.

1. Remove battery door by turning it

counterclockwise.

2. Install LR44 battery with positive (+) side up.
3. Replace battery door and lock it by turning

it clockwise.

Operating Instructions

A. Set Clock

1. Select CLOCK mode with sliding mode switch.

12:0000AM will appear after inserting battery.

2. Press and hold ENTER approximately

2 seconds until the display flashes.

3. Press CLEAR to toggle between 12-hour,

AM/PM time, and 24-hour, international time.

4. Press HR, MIN and SEC to enter the desired

time. Press and hold button for fast advance.

5. Press ENTER to exit. The PT1A will

automatically exit 3 seconds after the last entry.

B. Count Down

1. Select COUNT DOWN mode with sliding mode

switch.

COUNT DOWN will appear on the

display.

2. Press HR, MIN and/or SEC to enter the desired

time. Press and hold button for fast advance.

3. Press START/STOP to start the count down.

Press START/STOP button to interrupt the

count. Press START/STOP button again to

resume the count.

4. When the desired time is reached, alarm will

sound and the timer will start to count up the

“overtime”.

OT (OverTime) and COUNT UP

will appear on the display while

TIME’S UP

flashes.

5. Press START/STOP to stop the alarm. The

alarm will stop automatically after 60 seconds

while the count up continues.

Model: PT1A

4-Event Timer & Clock

Counts 100 hours by minutes & seconds

Advertising