CDN TA20 - Audio/Visual Refrigerator/Freezer Alarm EN User Manual

Audio/visual refrigerator/freezer alarm, Perfect for, Easy to use

Advertising
background image

Perfect For

Maintaining food-safe temperatures

in refrigerators or freezers

Easy To Use

Dual progress display

Audio/visual alert

Features

Shatterproof

39"/1 m sensor cable

ABS plastic

Sliding mode switches: F/C; refrigerator/freezer;

alert on/off

Temperature guide

Velcro

®

tabs secure case to outside surface

Suction cup firmly attaches sensor to inside surface

Battery and instructions included

Note:

Remove sticker from display before use.

Note:

In the following instructions, names of the control

buttons are shown in CAPS. Function information that appears

on the display is shown in

BOLD CAPS.

Battery Installation

Battery is installed. Replace battery when LCD

becomes dim or alert level declines.
1. Open battery door in back by sliding in direction

of arrow and lift.

2. Install 1.5V AAA battery observing polarity shown

in compartment.

3. Close battery door and push in opposite direction

of arrow to lock.

Operating Instructions

1. Place the probe sensor well inside the refrigerator

or freezer in a central location by pressing suction

cup firmly against inside surface.

2. Remove the protective papers from one side of

each of the Velcro

®

tab pairs and adhere complete

pairs to rectangular areas on back of case.

3. Determine where the case will be mounted to

the outside surface. Wipe the surface area clean,

remove the protective papers from opposite sides

of Velcro

®

tab pairs, and adhere tabs to surface by

pressing firmly. Wait 15 minutes for adhesive to set

before removing case.

4. Select Fahrenheit or Celsius using sliding mode

switch on side of case.

5. Select Refrigerator or Freezer using sliding mode

switch to the far left of the display.

6. Select audio/visual alert by sliding mode switch

to the immediate left of the display to the ON

position.

ALERT appears on Refrigerator/Freezer

side of the dual display when audio/visual alert

is ON.

7. Alert sounds and LED lights flash for 5 seconds

every minute when the internal temperature rises

above the safety zone.

Care of Your Product

Avoid exposing your thermometer to extreme

temperatures, water or severe shock.

Avoid contact with any corrosive materials such as

perfume, alcohol or cleaning agent.

Wipe display clean with a damp cloth.

Model: TA20

Audio/Visual

Refrigerator/Freezer Alarm

Signal sounds at 15° or 46°F/-9.5° or 8°C

Suction cup firmly attaches

sensor to inside surface

Built-in sensor

ALERT appears when

audio/visual alert is ON

Probe sensor

Double-sided Velcro

®

tabs

for easy outside mounting

Advertising