AMETEK 957 SSI Brik - Manual (Page 18)

18
1080 N. Crooks Road • Clawson, MI 48017 • 800.635.0289 • Phone 248.435.0700 • Fax 248.435.8120 • www.ametekapt.com
FACTORY AUTOMATION
®
NOTE: Contact our Technical Support at 1-800-635-0289 for custom configurations.
3.5 Part Numbering System
VP 957 0120 1
Stroke Length
1" to 180". Insert stroke length to 0.1 inch. Enter as
a four-place number. Example: A 12.0” stroke enters
as 0120.
OR
Insert stroke in millimeters to 5mm. Enter as a four-
place number. Example: 305mm stroke entered as
0305M.
S S
Output Type
S
SSI
Brik
Extrusion Data Length
1
24 Bits
2 25 Bits
3 26 Bits
B
Data Format
B
Binary
G Gray
X E
Units of Measure
E
Inches
M Metric
S
Position Update
S
Synchronous
A Asynchronous
F
Direction
F
Measures Direction Forward
R Measures Direction Reverse
V Velocity
1
Resolution
1
.005mm
2 .01mm
3 .05mm
4 .1mm
5 .02mm
6 .002mm
7 .001mm
8 .00005"
9 .0001"
A .0005"
B .001"
Connector Option
S
Standard M12 6 Pin
C_
Integral Cable Assembly. Insert length
in feet. Example: C6 = 6 foot cable. *
M 7 Pin DIN, MTS Style D70
B 8 Pin DIN, Balluff S32
H_
High Temp., Integral cable assembly
200° C Teflon Cable. Insert length
in feet.
Example: H6= 6 foot High Temp Teflon
Cable.
E
Environmental 10 Pin MS connector
compatible with SD0439700 cable
assemblies
* If stroke is in inches, cable is in feet.
If Stroke is in metric, cable is in
meters.
Options
X
None
A
Alarm Bit 25,
Parity 26
Part Number
Serial Number
Purchase Order Number
Sales Order Number
Comments