ATEN ACS-1208A - Manual (Page 16)

ACS-1216A Front View
1. Port LEDs
The Port LEDs provide status information about their
corresponding CPU Ports. There is one pair of LEDs for each
Port. The one on the left is the On Line LED; the one on the right
is the Selected Port LED:
M An On Line LED lights ORANGE to indicate that the
computer attached to its corresponding port is up and running.
M A Selected LED lights GREEN to indicate that the computer
attached to its corresponding port is the one that has the KVM
focus. The LED is steady under normal conditions, but flashes
when its port is accessed under Auto Scan Mode (see p. 4-14).
M When the ACS-1216A is first powered on, the On Line and
Selected LEDs blink in sequence as the Switch performs a
self-test.
2. Reset Switch
Pressing this switch in performs a system reset. The switch is
recessed and must be pushed with a thin object - such as the end
of a paper clip, or a ballpoint pen.
2 3
1
4
POWER
2003-06-20
ACS-1208A / ACS-1216A User Manual
1-8