Power Bright EPS1500 - Manual (Page 2)

Read these instructions before connecting and using your PowerBright™
Pure Sine Power Inverters. Failure in observing this warning may result
in injury to persons and damage to equipment.
General safety and installation information.
Warning! The following fundamental safety measures must be observed
when using electrical equipment to avoid danger of:
- Electric shock
- Fire
- Injury
About the unit itself
- The inverter must only be used for the purpose specified by the
manufacturer.
- Do not operate the inverter if the housing of cables are damaged.
- The inverter must be positioned and secured safely in order to avoid
knocking over or dropping
- If casing needs to be opened, make sure Input cables have been
properly disconnected.
- The inverter must be kept in a safe place out of the reach of children.
- The inverter may not be operated in a damp or wet environment.
- The inverter may not be used in rooms containing flammable materials.
- Make sure the inverter is well ventilated.
- Service and repair may only be carried out by skilled persons who are
familiar with the risks involved and the relevant regulations.
Caution by installation on boats
- Incorrect installation of electrical units on a boat may lead to corrosion
of the boat. Therefore, please let a (boat) electrician carry out the
installation of the inverter.
Intended use
The inverter is suitable for e.g. high-quality appliances from the audio,
video or PC.
The output voltage corresponds to the standard one of your socket (pure
sinus-voltage).
Attention! Please note that appliances like drills, TV’s or
refrigerators require a high starting-current which is far over the
nominal current.
With its low weight and the compact design the inverter can be easily
installed into campers, commercial vehicles or motor and sailing yachts.