Ambient Devices WS-0202 - Manual (Page 4)

Version 1.0 ©Copyright 2010, Ambient LLC. All Rights Reserved. Page 4
3. Remote Sensor Installation
It is recommended you mount the rain gauge sensor on a flat, well drained surface, where there is no
vibration.
Use 2 screws (not included) to affix the rain gauge to a flat surface.
4. Console Operation
Note: The console has two keys for easy operation: SET key, RAIN key.
Any program mode can be exited by waiting for the 30-second time-out to take effect.
4.1 Set (Program) Mode
While in Normal Mode, press and hold the SET key for at least three seconds to enter the Set Mode.
The first setting will begin flashing. You can press the SET key again to skip any step, as defined
below.
1. DST (daylight savings time) ON/OFF
2. Time Zone Setting
3. 12/24 hour format
4. Manual time setting (hours/minutes)
5. Calendar setting (year /month /date)
6. Temperature display units (Celsius or Fahrenheit)
7. Rainfall display units (mm or in)
In the Set mode, press the RAIN key to scroll the value. Hold the RAIN key for 3 seconds to increase
rapidly.
The SET mode will return to Normal mode if no key is pressed for 30 seconds.
The following table provides times zones throughout the world. Locations in the eastern hemisphere
are positive, and locations in the western hemisphere are negative.
Hours from
GMT
Time Zone Cities
-12 IDLW: International Date Line West ---
-11 NT: Nome Nome, AK
-10 AHST: Alaska-Hawaii Standard
CAT: Central Alaska
HST: Hawaii Standard
Honolulu, HI
-9 YST: Yukon Standard Yukon Territory
-8 PST: Pacific Standard Los Angeles, CA, USA
-7 MST: Mountain Standard Denver, CO, USA
-6 CST: Central Standard Chicago, IL, USA
-5 EST: Eastern Standard New York, NY, USA
-4 AST: Atlantic Standard Caracas
-3 --- São Paulo, Brazil
-2 AT: Azores Azores, Cape Verde Islands
-1 WAT: West Africa ---
0 GMT: Greenwich Mean London, England