VariZoom VZUSPROEX7-R - Manual

Recording:
Press the button next to the zoom rocker to activate
the pause and record functions on the camera.
Video Return:
Plays back the last few seconds of recorded
material.
Zoom:
Your VZ-Pro-EX features dual-variable speed control. You can
set the speed control knob to limit the max zoom speed available through the
variable thumb rocker. The variable thumb rocker is pressure sensitive and
allows you to smoothly ramp up to the max speed and back down again. In
other words, the rocker will give you the full range of zoom speeds if the dial
is turned all the way up, and a very small range of speeds if it is turned
almost all the way down (when it is turned completely down, zoom is
deactivated).
You can also use the speed dial in conjunction with the rocker, rolling the dial
with your index finger to vary speed as you depress the rocker. Max and min
zoom speeds may vary between different lens models, but the Pro controller
will access the full range of available speeds for any given lens.
Warranty Warning!
Do not open your control device. If you need service, call and we’ll
be happy to set up a service return. All controllers have a 2-year parts and labor warranty.
Please save your receipt and feel free to send us your comments and suggestions. Thanks!
*** READ BEFORE OPERATING ***
VZ-Pro-EX
Power:
The VZ-Pro-EX controller does not require batteries or external power.
Just plug the cable into the lens servo jack, and it’s ready to use.
Tripod / Jib Mount:
Your VZ-Pro-EX controller comes with a heavy-
duty quick-release clamping system to attach firmly to your tripod handle, shoulder
support or camera crane/jib. Extension cables are available from VariZoom.
Thank you for purchasing the VariZoom VZ-Pro-EX remote
variable-speed zoom controller for Sony EX cameras. We think
you’re going to like it a lot. Here are some important guidelines
for safe and effective operation…
VariZoom Lens Controls 512-219-7722 / www.varizoom.com
Connection:
Insert the VZ-Pro-EX controller
connector into the lens servo jack located on the lens grip
handle (see camera manual if you’re uncertain). Be sure to
match the pin connections carefully. When properly connected,
the cable should be firmly seated within the jack.
*****
WARNING: ABUSE OF THE CONNECTOR MAY RESULT IN
DAMAGE NOT COVERED BY THE WARRANTY. TREAT
THECONNECTOR GENTLY WHEN CONNECTING AND
DISCONNECTING FROM THE LENS.
*****