VariZoom VZTOC-FI2 - Manual (Page 11)

- 11 -
H) – Motors Move on its own or Unwanted Jitter in the motors movement – Turn the
backlash setting of the malfunctioning motor down and try turning up the smoothing
level for that motor.
Warning: If you are using the TOC with a servo powered lens, make absolutely sure that
the lens servo for the function you’re trying to control is always deactivated, otherwise the
lens servos can end up fighting the TOC motors resulting in severe damage to either the
lens or the TOC system. Please be aware that some “full auto” modes may override the lens
servo switches.
More questions? Give us a call at 512-219-7722 or visit the website for updated
instruction manuals –
www.varizoom.com