VariZoom VZCINEMAPRO-JR-K2 - Manual (Page 20)

- 20 -
Soft limits aren’t accurate
1) Re-calibrate “home” sense. If the head has been moved while powered down, the
home sense will be lost, and if the soft limits are set to “reference sensor”, they will be
lost as well.
2) If the soft limits are set to “reference zero”, and your zero position has been changed,
the soft limits will also chance with the new zero.
3) Perform all system resets, then re-set the soft limits in the “set limits” menu.
17. System resets
The “reset all” option is found in the second setup menu screen.
When selected this will reset all parameters only. All stored marks, and takes will not be
effected.
To reset all motor parameters only, turn the console power off
Hold the “cancel” and “stop” button simultaneously. While holding both buttons turn
console power on.
The screen will then read “Accept = reset all motors”
Press the “enter” button, and all motor parameters will be reset.
To erase all takes turn console power off.
Hold the “cancel” and “record” buttons simultaneously. While holding both buttons turn
console power on.
The screen will then read “Accept = erase all takes”
Press the “enter” button, and all takes will be erased.
To erase all marks turn console power off.
Hold the “cancel” and “play” buttons simultaneously. While holding both buttons turn
console power on.
The screen will then read “Accept = erase all marks”
Press the “enter” button, and all marks will be erased
Note: resetting all motor parameters is recommended after updating system software. It
is also recommended if the systems memory ends up corrupted.
18. Options and Specs
Additional Software- The controller can be upgraded to have more position marks,
intervalometer mode, and additional recorded moves.