VariZoom VZT100A - Manual

VZ-T100A
Aluminum Tripod
Features:
• Dual Stage Legs with floor spreader
• 100mm bowl compatible with a wide range of heads, including VZ-H100 and Zero Gravity
• Can be attached to the VZ-D50, VZ-D100 or VZ-Cinetrac Dolly for tracking shots
(Sold Separately).
• Compatible with cameras up to 15lbs.
• NOW in black finish (may differ from picture)
Assembly:
The legs have two sliding sections to allow a
wide range of height adjustment. To adjust
the tripod to the desired height, simply twist
the lock knobs and extend the legs, then twist
the knobs back into the locked position. Make
sure each lock is secured completely to
prevent the legs from shifting under the
weight of the camera. The spreader is
adjustable to increase or decrease sprawl, or
it can be removed entirely by unbuckling the
rubber latches, revealing the dual-spike feet.
This setup has limited applications however,
and the legs will not have any built-in
mechanical stop to prevent them from
spreading apart, so exercise caution if you
choose to remove the spreader.
The VZ-T100A tripod is covered by a one-year warranty (parts/labor). Please retain your receipt for warranty verification. All
returns and repairs must be accompanied by a Return Merchandise Authorization number
Warnings: Do not put more than the recommended weight onto the tripod.
The Support System