OZ Lifting Products Beam Trolleys OM - Manual (Page 7)

pg.7
Operation
Warnings & Precautions
Trolley operators should read and fully comprehend this entire manual and all warnings on the hoist before
beginning hoist operation. If this manual is not read and followed completely injuries may occur.
Operator Requirements:
Must be trained in proper trolley operation and dealing with potential malfunctions.
Should not operate trolley while under influence of alcohol, medications, or drugs.
Should not operate the trolley while tired or distracted.
Should not operate trolley if they have a history of seizures or other medical issues that may interfere with
operation.
Should have proper coordination and vision.
Prior to Operation be sure:
Trolley is in proper working condition and maintenance records are up to date.
Operation
Be aware of trolley load capacity and don’t overload.
Attach load to suspension plate directly under the trolley
Maintenance
Inspection
Monthly: Inspect the suspension plate, track wheel, and locking nuts.
Locking Nuts
Be sure that locking nuts are secure.
Operators should visually inspect trolley on a regular basis. Observe for wear, damage, cuts, cracks, or
corrosion. If any problems are observed the trolley should be placed out of service until it can be repaired.
Use only OZ Lifting products for replacement parts.
Once a year the trolley should be taken to an authorized repair center for professional inspection.
Pre-Installation
Check for damage during shipment. Do not install or use a damaged product.
Contact your OZ Lifting Product dealer if there are any problems.
Before initial operation:
Read and comply with all instructions and warnings furnished with or attached to the product if applicable.