Zoo Med LF-80_ReptiSun - Manual

• BRILLIANT LIGHT! 6500K daylight high output LEDs for truly
naturalistic lighting.
• PLANT GROWTH: 620 nm RED LEDs stimulate live plant growth.
• MOON LITE®: 465 nm BLUE LED simulates nighttime lighting
“Lunar Effect”.
• MODULAR DESIGN: Individual LED modules & quick disconnects
allow for easy replacement of LED modules. Never throw another
LED fixture away again!
• DUAL SWITCHES FOR INDEPENDENT CONTROL OF THREE
LIGHTING MODES.
• HANG OR SET ON TERRARIUM: Adjustable legs and stainless steel
suspension kit included.
• LONG LIFE: 20,000 hour life range!
NOTE: Does not provide UVB OR SIGNIFICANT HEAT! Use in combination with a UVB source for species that NEED UVB.
SAFETY INSTRUCTIONS:
To reduce the risk of fire, injury, or electric shock, read and follow these instructions prior to operating this light fixture. Save these
instructions for future reference.
• DO NOT exceed electrical rating. Only use the power supply included with this fixture.
• DO NOT splice, repair, or modify. Fully extend cord before using.
• DO NOT use in wet conditions. Use indoors only. Not for use with aquariums.
• Keep children and pets (other than your terrarium animals) away from fixture.
• Fully insert plug. Unplug power cord before performing fixture maintenance (including replacing or changing LED modules).
• DO NOT cover with blankets, rugs or any material.
• DO NOT use damaged cord sets – inspect periodically.
• DO NOT alter or modify this product. Contact an electrician if you are unsure about the electrical connection.
• This unit uses LED modules that are designed to be replaceable. Do not attempt to replace modules if you are unsure about the proper procedure.
Return to Zoo Med for inspection and repair.
SUSPENSION KIT WARNING:
Failure to securely suspend this fixture over a terrarium can result in damage, injury, or electric shock. When suspending this light fixture using the
enclosed suspension kit, be sure that the cables are securely attached to hardware that is capable of supporting the weight of the light fixture. If you
are unsure about safe hanging methods, contact a qualified licensed contractor to hang this fixture for you. Zoo Med Laboratories, Inc. accepts no
liability for damage or injury resulting from improper or unsafe use of the suspension kit.
INSTALLATION INSTRUCTIONS:
Zoo Med’s ReptiSun LED Terrarium Hood can be installed over your terrarium using one of the following methods:
• DIRECTLY ON TERRARIUM USING SLIDING RAILS:
This fixture can be placed directly on top of your terrarium. To install using the adjustable sliding
rails, adjust the width of the rails to match the width of the terrarium, and securely place the
fixture on the upper terrarium frame. Each rail should be extended the same amount, and should
not be pulled completely from the aluminum housing.
Congratulations on your purchase of Zoo Med’s REPTISUN LED TERRARIUM HOOD! The following instructions will assist you with the proper set-up
and operation of this unit. Please read the following instructions carefully. If you have any questions regarding these instructions or the proper use of
this item, please contact our customer service department at [email protected] or by calling (888) 496-6633 (US and Canada only). Customers in
other countries, please call (805) 542-9988.
FEATURES:
ITEMS COVERED:
LF-80, LF-81, LF-82 and LF-83
REPTISUNLED LED
TERRARIUM HOOD
INSTRUCTIONS
LED HO HIGH OUTPUT
(CONTINUED)