Addonics Technologies Mobile DVDR/RW - Manual (Page 9)

CardBus/PCMCIA driver Installation
For Windows 95, 98, 98SE and Me
(Do not run the SETUP program from the driver disk, SETUP
Is for DOS or WIN 3.1 using PCMCIA mode only)
1. Power on your system and wait for the Desktop screen.
2. Connect the CardBus/PCMCIA cable and external AC/DC adapter into
the back of your Mobile DVD/CDRW.
3. Plug the CardBus / PCMCIA card end of the cable into the PCMCIA
slot on the side of your computer.
4. The system will automatically identify the new card and ask to load the
driver.
5. Insert the driver diskette in “A” drive and follow the instruction on the
screen to load “Addonics CardBus IDE Controller”. Be sure to
select the A:/win9xMe folder when the system prompts
for the location of driver disk.
6. When installation is finished, a PCMCIA card icon will appear in the
lower right-hand of the Window’s system tray.
7. Double Click on the “My Computer” icon. Your Mobile DVD±R/RW
will appear as a CD drive icon. You are now ready to use the Mobile
DVD±R/RW drive.
Addonics Technologies – Mobile DVD±R/RW Users Guide v 1.0 8