Caution – Bloom Manufacturing 1200W Series User Manual
Page 6
Section 5
Speed Reducer Installation
• To must make sure that your speed Reducer is securely mounted in order for it to
function properly and to ensure safe operation.
• The mount must be flat to ensure proper alignment of the gearbox.
The mount must be flat to ensure proper alignment of the gearbox.
• Speed Reducers must never be fastened directly to the frame of a truck. Mounting
brackets should be used.
• With a hydraulically driven Speed Reducer, make sure the hydraulic system is clean
and that all components function properly, especially the relief valve.
Speed Reducer Series
CAUTION
p
800W 1000W
1100W 1200W
Base Mount (steel)
Thickness
Angle Mounts (steel)
Length
1/2”
2-1/2”
1/2”
2-1/2”
1/2”
2-1/2”
Hardware Requirements
1/2”
2-1/2”
Length
Width
Thickness
Capscrews (Hexhead)
Size
Thread
Grade
2 1/2
2-1/2””
1/4”
1/2”
13 UNC
5
2 1/2
2-1/2””
1/4”
1/2”
13 UNC
5
2 1/2
2-1/2””
1/4”
1/2”
13 UNC
5
2 1/2
2-1/2””
1/4”
1/2”
13 UNC
5
Torque / Tightening (foot pounds)
57
57
57
Section 6
Speed Reducer Operation
57
• To familiarize yourself with the Speed Reducer, run it for a few minutes to understand the controls and the “feel” of the
Speed Reducer. Pay particular attention to the controls and how they operate.
• Make sure you understand which way the Speed Reducer will rotate when the control lever is moved.
• Always make sure that all people are clear of the load before beginning a Speed Reducer operation.
• Do Not attempt to defeat the relief valve.
(a) Automatic Safety Brake
S
Bl
S
d R d
i
d ith t
ti h d
li b k t h ld
d d l d If
Some Bloom Speed Reducers are equipped with an automatic hydraulic brakes to hold suspended loads. If your
Speed Reducer is not equipped with one, it is intended for pulling loads only. If you wish to lift and suspend loads with
your Speed Reducer, it can be retrofitted with a brake. Please consult the factory for details. The safety brake is an
important feature of your Speed Reducer and must be maintained properly.
6
THINK S-A-F-E-T-Y FIRST Bloom Mfg Inc. 319-827-1139