DME Standard Bayonet Thermocouples - Manual (Page 2)

TUBE
0.188 DIA.
L
0.53
45.
0°
45 TYPE
TUBE
0.188 DIA.
90.00°
L
0.53
90 TYPE
0.188 DIA.
TUBE
L
STRAIGHT TYPE
DANGER
WARNING
out residual moisture before applying full power. Failure to do so may cause
IMPORTANT SAFETY INFORMATION
A hot-runner system includes electrical elements and may contain molten
plastic at elevated temperature and pressure. To avoid injury, exercise
caution by reading these instructions before servicing or operating the
system.
These instructions must be passed on to the end user where they should
be read before using this product. Failure to do so can result in serious
injury or death.
Failure to comply can result in serious injury or death:
STORED ENERGY AND HIGH TEMPERATURE HAZARDS
This product maintains molten plastic at high pressure. Use caution when
operating and servicing the system.
Physical contact with molten plastic may result in severe burns. Proper
protective equipment, including eye protection, must be worn. This product
has heated surfaces. Use caution when operating and servicing the system
to avoid severe burns. Proper protective equipment should be worn.
Failure to comply will result in serious injury or death:
ELECTRICAL HAZARDS
Improper voltages or grounding can result in electrical shock. Use only
with proper voltage and a proper earth ground.
To avoid electrical shock, do not operate product when wet.
Do not operate this equipment with covers or panels removed.
To avoid electrical shock, turn off main power disconnect and lockout /
tag out before servicing this device. Do not connect temperature sensors to
electrical power. It will damage the product and it can cause fire, severe
injuries or even death.
If green ground wire present wire must be connected to the ground.
Do not rebend rigid leads. Rebending leads might result in damage to circuit.
Product might absorb moisture when cool. Use low Voltage or power to drive
damage to this product.
D-M-E COMPANY
29111 STEPHENSON HIGHWAY
MADISON HEIGHTS
MICHIGAN 48071 USA
US 800-656-6653
CANADA 800-387-6600
www.dme.net
0.
180
D
IA.
TUB
E
.50 TO 10.50 INCHES
ADJUSTABLE FROM
TC-3590
3.500
L DIM.
6.000
ME-0708-PS-014-B TC/PS
NUMBER
2.500
TC-3545
2.500
TC-2500
3.500
CATALOG
CATALOG NUMBER
TC-6000
L DIM.
TC-3500
CATALOG NUMBER
CATALOG NO.
TC-2590 2.500
Please read carefully before installing thermocouples
STANDARD BAYONET THERMOCOUPLES
MACHINING DETAILS FOR D-M-E
TC-6090 6.000
3.500
TC-2545
L DIM.
TC-6045
6.000
TC-8000
ADJUSTABLE TYPE
09-08