Summers Rockpicker - Manual (Page 28)

Nos Feature Code Description
1 Product Series M Motor
2, 3 2000 Series 02 2000 Series
4, 5 Displacement cm 3 /r [in 3 /r]
05 80 [ 4.9]
06 100 [ 6.2]
08 130 [ 8.0]
10 160 [ 9.6]
12 195 [11.9]
15 245 [14.9]
19 305 [18.7]
24 395 [24.0]
30 490 [29.8]
6, 7 Mounting Flange
AD 4 Bolt (Bearingless)
101,6 [4.00] Pilot Dia. and
13,59 [.535] Dia. Mounting
Holes on 127,0 [5.00] Dia. B.C.
AC 2 Bolt SAE A (Std.)
82,5 [3.25] Pilot Dia and
13,59 [.535] Dia. Mtg. Holes
on 106,4 [4.19] Dia. B.C.
AB 4 Bolt (Wheel) 108,0 [4.25]
Pilot Dia. and 13,59 [.535]
Dia. Mounting Holes on
147,6 [5.81] Dia. B.C.
AH 4 Bolt (Standard) 82,5 [3.25]
Pilot Dia. and 14,59 [.535]
Dia. Mounting Holes on
106,4 [4.19] Dia. B.C.
AJ 4 Bolt Magneto (Std.)
82,5 [3.25] Pilot Dia. and
13,59 [.535] Dia. Mtg. Holes
on 106,4 [4.19] Dia. B.C.
AF 2 Bolt SAE B (Std.)
101,6 [4.00] Pilot Dia. and
14,35 [.565] Dia. Mtg. Holes
on 146,0 [5.75] Dia. B.C.
AP 4 Bolt (wheel compatible for
HAYES BRAKE) 107,9 [4.25]
Pilot Dia. and 13,59 [.535]
Dia. Mounting Holes on
147,6 [5.81] Dia. B.C. with
Turned Down Housing to
88,9 [3.50] Dia.
Nos Feature Code Description
8, 9 Output Shaft 00 Bearingless
01 1 inch Dia. Straight with
Woodruff Key, 1/4-20
Threaded Hole and 38,4
[1.51] Max. Coupling Length
02 1–1/4 inch Dia. Straight with
Straight Key, 3/8-16 Threaded
Hole and 47,3 [1.86] Max.
Coupling Length
23 32 mm dia. Straight with
Straight Key, M8 x 1,25 -6H
Threaded Hole and 56,4
[2.22] Max. Coupling Length
04 1-1/4 inch Dia. Splined 14 T,
3/8-16 Threaded Hole and
33,0 [1.30] Min. Full Spline
Length and 45,5 [1.79] Max.
Coupling Length
03 1-1/4 inch Dia. Tapered with
Straight Key and Nut
05 1 inch SAE 6B Splined 6T,
1/4-20 Threaded Hole and
22,8 [.90] Min. Full Spline
Length and 28,8 [1.13] Max.
Coupling Length
07 7/8 inch Dia. Splined 13T,
15,2 [.60] Min. Full Spline
Length and 30,8 [1.21] Max.
Coupling Length
24 1–1/4 inch Dia. Straight with
Straight Key, 3/8-16 Threaded
Hole and Corrosion
Resistant (seal area to shaft
end)
25 1–1/4 inch Dia. Tapered with
Straight Key and Nut,
Corrosion Resistant (under
seal area only)
26 25 mm Dia. Straight with
Straight Key, M8 x 1,25 -6H
Threaded Hole and 38,4
[1.51] Max. Coupling Length
EATON Char-Lynn 2000 Series Disc Valve Motors C-MOLO-TM001-E September 2003 6
Model Code
The following 24-digit coding
system has been developed
to identify all of the configu-
ration options for the 2000
Series motor
Use this model code to spec-
ify a motor with the desired
features. All 24-digits of the
code must be present when
ordering.
You may want to photocopy
the matrix below to ensure
that each number is entered
in the correct box.
Model Code for 2000
Series Motors
Model Code — 2000 Series Disc Valve Motors Sample Model Code:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
M 0 2 0 0 0 0