Initial setup and adjustment, Initial setup and adjustment of mechanical system – Summers 3Pt Supersprayer User Manual
Page 18
12
SECTION 3 - SPRAYER OPERATION
3.2 INITIAL SETUP AND ADJUSTMENT OF MECHANICAL SYSTEM
1. COMPLETE WARRANTY REGISTRATION CARD
A. Complete and return WARRANTY REGISTRATION CARD located at the beginning of this manual. RE-
TURNING CARD ENTITLES YOU TO A FREE GIFT AND ASSURES THAT PRODUCT INFORMATION
BULLETINS WILL BE SENT DIRECTLY TO YOU.
B. Complete the OWNER REGISTRATION also located at the beginning of this manual. REMEMBER TO
BRING OWNER REGISTER INFORMATION WHEN ORDERING PARTS.
2. PREPARE TO LOAD SPRAYER.
A. TRUCK MOUNTED SPRAYERS
1. Service gasoline engine as recommended by manufacturer.
2. Check bands securing tank for tightness.
3. Check all hose connections.
4. Check oil level in Electric-Hydraulic tip lift motor.
5. Locate or drill a hole in left front corner of the truck bed to attach the
sprayer ground cable.
6. Mount sprayer hold down bracket to front of truck bed. See template
below.
7. Verify knock on blocks are in place between sprayer frame and truck wheel wells to prevent shifting in
the pickup box.