Triton SB-Interpreter - Manual (Page 7)

Page 4
IMPORTING SUB-BOTTOM DATA
There are currently 3 file types compatible with SB-Interpreter:
a. SEG-Y (*.seg, *.sgy, *.segy)
b. Triton XTF (*.xtf)
c. Delph SEG-Y (*.tra)
Sub-bottom files can be imported into the project from the ‘File’ menu, toolbar buttons, and
by right-clicking in the ‘Seismic Files’ section of the file tree via two methods. These options
are:
a. Import File – can select a single file or multiple files in a folder
b. Import Folder – brings in all files in a selected folder
By default SB-Interpreter assumes that the navigation data are in Lat/Lon related to the
WGS84 datum. If so, SB-Interpreter will read the navigation, automatically selecting the
correct UTM Grid Zone. If the navigation is projected, a projection dialog box will pop up.
It is possible to set the projection prior to importing data in the ‘Projections’ tab in
‘Application Settings’ in the ‘View’ menu. This is important if the navigation coordinates in the
data file are in Lat/Lon coordinates, but they are related to another datum than WGS84.