NewAir AIC-220 - Manual (Page 5)

3
MAKING ICE CREAM & FROZEN DESSERTS:
Illustration 2 – Control Panel
Connect the Ice Cream Maker to a Power Source
Make sure that the voltage indicated on the rating label is compatible with your home voltage. Plug the unit into a
power outlet.
Button Functions
[POWER] Button: After connecting the unit to the power supply, press the [POWER] button. The LCD screen should
display “60:00”; this means the default operating time is 60 minutes.
[TIMER] Button: The unit can be set to 10, 20, 30, 40, 50 and 60 minutes of operation time. You can change the
operating time by repeatedly pressing the [TIMER] Button. You can select different operating times according to your
taste preferences, but the default time will be 60 minutes.
[START/STOP] Button: After the operating time is set, press the [START/STOP] button to begin the ice cream
making process. The unit will immediately start mixing and cooling your ingredients and both indicators will light up.
When the countdown ends, operation will automatically stop, and the unit will beep 10 times. The LCD screen will
then display "00:00".
If the ice cream is not immediately removed or if the machine has not been turned off for 10 minutes, the unit will
automatically go into “Extended Cooling” mode to prevent the ice cream from melting.
Compressor Self-Protection Function:
1. If the POWER button is pressed during the ice cream making process, the machine will automatically begin to
count down for 3 minutes. When the countdown ends, the machine will resume again, and the mixing and
cooling functions will start simultaneously. If the POWER button is pressed again during the countdown, the
mixing function will start immediately, but the cooling function will only start after the end of the countdown.
2. If the machine suffers a power failure or is suddenly unplugged during the ice cream making process, the
automatic countdown function will be deactivated. If this occurs, wait 3 minutes before turning on the
machine again. Otherwise, the unit will go into compressor self-protection mode.