Electrolux ERU1101FOW - Manual (Page 10)

Problem Possible cause Solution
The appliance has no
power. There is no voltage
in the mains socket. Connect a different electri-
cal appliance to the mains
socket.
Contact a qualified electri-
cian.
The Pilot light flash-
es. The appliance is not work-
ing properly. Contact a qualified electri-
cian.
The Alarm light
flashes. The temperature in the
freezer is too high. Refer to "Excessive Tem-
perature Alarm"
The acoustic alarm
sounds The temperature in the
freezer is too high. Refer to "Excessive Tem-
perature Alarm"
The door is left open. Close the door.
The compressor op-
erates continually. The temperature is not set
correctly. Set a higher temperature.
The door is not closed
correctly. Refer to "Closing the door".
The door has been
opened too frequently. Do not keep the door open
longer than necessary.
The product temperature
is too high. Let the product tempera-
ture decrease to room tem-
perature before storage.
The room temperature is
too high. Decrease the room temper-
ature.
The Fast Freeze function is
switched on. Refer to "Fast Freeze func-
tion".
The temperature in
the freezer is too
low. The temperature regulator
is not set correctly. Set a higher temperature.
The Fast Freeze function is
switched on. Refer to" Fast Freeze func-
tion".
The temperature in
the freezer is too
high. The temperature regulator
is not set correctly. Set a lower temperature.
The door is not closed
correctly. Refer to "Closing the door".
The product temperature
is too high. Let the product tempera-
ture decrease to room tem-
perature before storage.
Many products are stored
at the same time. Store less products at the
same time.
Products are too near to
each other. Store products so that
there is cold air circulation.
10 www.electrolux.com