Electrolux ERN3213AOW - Manual (Page 17)

21 mm
~50 mm
~50 mm
90 o
90 o
90 o
Install the part (Ha) on the inner side of the
kitchen furniture.
Ha
Hc
Push the part (Hc) on the part (Ha).
Ha
Hb
8 mm
Open the appliance door and the kitchen
furniture door at an angle of 90°.
Insert the small square (Hb) into guide (Ha).
Put together the appliance door and the
furniture door and mark the holes.
Remove the small squares and drill holes
with ø 2 mm at 8 mm from the outer edge
of the door.
Place the small square on the guide again
and fix it with the screws supplied.
ENGLISH 17