Steffy Wood Products 8-Section Rest Mat Storage Unit - Manual (Page 2)

SHELVES
DIVIDER
4
(refer to sketch at right)
Slide the slots in the shelves into the slots in the
divider and side panel. Be sure the back of the
shelves are flush with the back of the divider.
BACK PANEL
5
(refer to sketch above and at right)
Slide a back panel into the slots in the top, bottom
and side panel. Be sure the panel is completely in
the slot in the side panel.
Slide a plastic divider into the edge of the back
panel, then slide another back panel into the slots
in the top and bottom panels and into the open
edge of the plastic divider.
Repeat this process for the remaining back panels.
LEFT SIDE
6
(refer to sketch at right)
Attach the remaining side to the top and bottom
panels. Be sure the shelves and back panels are
in the slots in the side panels.
Check all bolts
periodically to make
sure they are tight!!
LEFT SIDE
BACK OF SHELF
TOP PANEL
BOTTOM PANEL
RIGHT SIDE
BACK PANEL
BACK PANEL
PLASTIC DIVIDER
PLASTIC DIVIDER
BOTTOM PANEL
WARNING !!
Serious or fatal crushing injuries can occur from
furniture tip-over. To help prevent tip-over:
Place heaviest items on bottom of cabinet.
Never allow children to climb or hang on doors or shelves.
Use of tip-over restraints may only reduce, but not
eliminate, the risk of tip-over.
7
Furniture tipping restraint hardware is included in with
the hardware package for this unit. Follow the
installation instructions printed on the restraint
hardware bag.