Steffy Wood Products Two-In-One Kitchen - Manual (Page 3)

6
Attach the top panel to the sides, top back strip and
front strip using the cams and a screwdriver. Make
sure all six connector bolts are in the holes before
inserting the cams. Tighten securely.
TOP PANEL
CAM
CAM
FRONT STRIP
RIGHT SIDE PANEL
LEFT SIDE PANEL
7
Faucet assembly (refer to drawing above)
Insert the spigot through the back of the back plate.
Attach the back plate/spigot to the backsplash using two 3/4"
long flat head screws.
Attach the red and blue knobs to the back plate using one, 1"
long flat head screw per knob.
Attach the red knobs to the front strip using one, 1" long flat
head screw per knob.
8
Attach the backsplash to the back of the top using three,
1-1/2" long round head screws.
Place the red sink tub into the hole in the top panel.
1-1/2" LONG SCREW
BACKSPLASH
SINK TUB
CHECK ALL BOLTS PERIODICALLY TO
MAKE SURE THEY ARE TIGHT!
BACKSPLASH
FRONT STRIP
RED KNOB WITH POINTER
1" LONG SCREW
3/4" LONG SCREW
1" LONG SCREW
SPIGOT
BACK PLATE
RED KNOB
BLUE KNOB