Kestrel, 4000 pocket weather, Tracker 15 – Kestrel 4000 User Manual

Page 8

Advertising
background image

Kestrel

®

4000 Pocket Weather

®

Tracker

15

Auto Store
(On/Off)

When On, data is automatically stored at

preset Store Rate. When Off, data is only

stored when manually captured with the

button.

Press or to toggle between

On and Off.

Store Rate*
(2 sec – 12 hr)

The frequency at which data sets are

automatically stored. (Battery life may be

shortened if data is stored frequently.)

Press or to increase or

decrease Store Rate frequency.

Overwrite
(On/Off)

This setting only applies when the data

log is full. When On, oldest data point is

discarded to allow memory for the new

data point. When Off, new data points are

not saved.

Press or to toggle between

On and Off.

Man Store
(On/Off)

When On, data is stored when the

button is pressed. When off, the

button is

disabled.

Press or to toggle between

On and Off.

* When unit is off, data is NOT stored for 2 sec and 5 sec Store Rates.
Measurements

Measurement screens can be turned off, or “hidden” from the normal measurement navigation. For
example, if wind chill is not of interest, it can be hidden. Press the or button to toggle between ON

and OFF for each individual measurement. Press the or button to highlight the desired measurement.

Press the button to return to the Main Setup Menu. Even when measurements are hidden, the Kestrel

Meter will continue to log data for all measurements. If you wish to see the logged data for measurements

that are hidden, simply enter the Measurement screen and turn them back on. The data will be stored in the

same manner as all other measurements, as specified in the Store Rate.
Graph Scale

These settings control the chart limits of your Kestrel Meter. Depending on the conditions, the lower and

upper limits of the chart scale may need to be adjusted in order to get the best view of the data. Highlight

the desired measurement by pressing the or button. Select the highlighted measurement by
pressing the button. Press the or button to increase or decrease the value of the limits. Press the

or button to change between the upper and lower limits. Press the button to exit and return to the

Measurement Selection screen. Press the button to return to the Main Setup Menu.

Wind Speed

Temperature, Dewpoint,

Wet Bulb Temp, Wind Chill &

Heat Index

Pressure

Altitude,

Density

Altitude

m/s meters per second
km/h kilometers per hour
kt knots
mph miles per hour
ft/m feet per minute
Bft Beaufort

°C

Celsius

°F

Fahrenheit

InHg inches

mercury
HPa hectopascals
psi pounds per

square inch
mb milibar

m meters
ft feet

Advertising