Kestrel 4500 Horus (Ballistics) - Manual (Page 7)

13
Target A is the current active target.
Target B is the current active target
Target Range
• Use or to highlight “TR”.
• Use and to adjust the value.
Target Range Estimator
This function estimates the range of a target based on
size, image and calculated range.
• When “TR” is highlighted, press button to enter
Range screen.
• Use to highlight “Estimate” and press to
enter Range Estimate screen.
• Use or to highlight a parameter.
T g t
Wind
100 m
5m p h
000°
3oc
49.24
1.36/3.03
E
W
R
T g t
Wind
549 m
5m p h
000°
3oc
16.58
0.68/1.46
E
W R
Lead (or hold)
Windage
Elevation
• Use and to adjust values for each parameter.
• When all parameters are set, press to escape.
• An "Accept" screen will appear, scroll to "Yes" if
you would like to accept values. Use to
select the highlighted option.
Wind Direction & Wind Speed
There are two wind speed measurements on the target
screen (WS1 and WS2) for minimum and maximum wind
speed as well as wind direction (WD). You have the option to
manually adjust the wind speed and wind direction values or
use the capture feature to automatically get a reading.
Manual mode
• Use or to highlight “WD”, “WS1”, or “WS2”.
• Use and to adjust values for each parameter.
Capture mode
• In the Target screen, press to enter into either
the “WD”, “WS1”, or “WS2” screen.
• Press to enter into the capture mode.
• Face the back of the Kestrel directly into the wind and
press to start and stop the capture mode.
TR
meters
Estimate
Range
998m