Electrix Tweaker Traktor Reference - Manual (Page 6)

2. Traktor LE 2 Mapping Details
6
2.1 Navigation
2.2.1 Shift
The Shift button gives access to secondary functions on many of the TWEAKER’s control.
2.2.2 Browsing
The large navigation encoder scrolls through the library. Hold Shift to browse the library tree.
Pushing the encoder toggles browser-only view.
Use the up and down navigation buttons to scroll through the library by page
Hold Shift and use the up and down navigation buttons to scroll through the library tree
2.2.3 Loading
Load tracks using the left and right navigation buttons. Left for deck A. Right for deck B.
Hold Shift to unload tracks.
2.2 Mixer
2.2.1 Filter/Gain Knobs
By default, the two analog knobs are used as filters for each deck. In the center position, the filter is
off. Turning the knob to the left activates the low pass filter, turning it to the right activates the high
pass filter. The two knobs also double as Gain knobs while holding Shift.
2.2.2 Headphone Monitoring
Activating the Monitor Cue button on either channel give access to the Cue Mix and Cue Level con-
trols on the two filter knobs while holding Shift, temporarily deactivating the filter controls. Gain
function is still accessible while holding Shift.
2.2.3 Channel Strip Control Modes
The channel strips have 2 standard control layers: EQ and Loop/FX. The Control Mode buttons are
used to switch between those layers. Each layer is represented by an LED color.
EQ (Default)
Turning the encoders adjusts the high, mid, and low frequencies.
Pushing the encoders kill the respective bands.
Holding down Shift and pushing the encoders resets the EQ.