Electrix Filter Queen - Manual (Page 10)

Filter Engage: This control toggles the filter on and off.
When the filter is off the Filter queen circuit is bypassed.
Whenever the Filter Queen is Engaged the LFO is automatically
restarted. Use this feature to start long LFO sweeps on the
downbeat by engaging the Filter Queen right on the top of the
bar.
Filter Momentary : This switch temporarily engages the
stereo filter. Try using it to tap rhythmic patterns while adjusting
the frequency knob.
Effect Mix: Controls the Mix of the Filter in relation to your
dry signal. 0% is all dry, or the same as bypassing the Filter
Queen. 100% will be all Filter Queen and none of your dry sig-
nal.
LFO Waveform: The LFO provides the following cyclic (or
repetitive) waveforms: Sawtooth, Inverse Sawtooth, Triangle,
Square Wave and Random. If you increase the LFO depth and
turn the LFO speed up a bit you will be able to hear their effect
on your frequency setting. The Square Waveform is great for
gating effects, while the triangle is better for long, slow sweeps.
LFO Depth: This controls the amount the LFO changes the
filter frequency.
LFO Speed: LFO Speed controls the period of the LFO
waveforms by changing the frequency of the LFO. The LFO
Frequency range covers 0.05 Hz to 30 Hz for subtle to extreme
effects.
In and Out Level LEDs: These LEDs help you set and
monitor the optimal signal levels from your signal sources as well
as the outputs of Filter Queen. The optimal setting occurs when
the In and Out LEDs show mostly green with periodic peaks of
red.
.
U Un nd de errs stta an nd diin ng g tth he e F Fiilltte err Q Qu ue ee en n • F Frro on ntt P Pa an ne ell