Notifier Chime Strobes - Manual (Page 3)

dn-7089:a3 • 4/20/10 — Page 3 of 4
Tone Selection
Chime tone selection is accomplished by using the rotary switch on the back
of the product. The current draw and sound measurements for various
chime tones are listed below.
Chime Current Draw,
UL Maximum (mA RMS)
Sound Output (dBA), Chime and Chime/Strobe
SpectrAlert Advance Chime/Strobe Dimensions
Sound Pattern dB
8 – 17.5 Volts 16 – 33 Volts
DC FWR DC FWR
1-Second Chime HIGH 34 mA 50 mA 58 mA 51 mA
1-Second Chime LOW 30 mA 51 mA 51 mA 54 mA
1/4-Second Chime HIGH 34 mA 51 mA 50 mA 50 mA
1/4-Second Chime LOW 31 mA 51 mA 50 mA 52 mA
Temporal Chime HIGH 30 mA 50 mA 48 mA 54 mA
Temporal Chime LOW 30 mA 47 mA 50 mA 51 mA
5-Second Whoop HIGH 32 mA 52 mA 34 mA 54 mA
5-Second Whoop LOW 30 mA 40 mA 34 mA 52 mA
One Test Chime HIGH 48 mA 49 mA 50 mA 50 mA
Switch
Setting Sound Pattern dB
8 – 17.5 Volts 16 – 33 Volts
DC FWR DC FWR
1 1-Second Chime HIGH 58 dBA 59 dBA 61 dBA 61 dBA
2 1-Second Chime LOW 53 dBA 54 dBA 55 dBA 55 dBA
3 1/4-Second Chime HIGH 63 dBA 64 dBA 66 dBA 66 dBA
4 1/4-Second Chime LOW 58 dBA 59 dBA 60 dBA 60 dBA
5 Temporal Chime HIGH 62 dBA 64 dBA 68 dBA 69 dBA
6 Temporal Chime LOW 55 dBA 57 dBA 60 dBA 60 dBA
7 5-Second Whoop HIGH 68 dBA 71 dBA 75 dBA 77 dBA
8 5-Second Whoop LOW 62 dBA 64 dBA 67 dBA 68 dBA
9 One Test Chime HIGH 57 dBA 55 dBA 61 dBA 57 dBA
Chime Patterns
Setting Repetition Rate dB Out
1 1-Second Chime HIGH
2 1-Second Chime LOW
3 1/4-Second Chime HIGH
4 1/4-Second Chime LOW
5 Temporal Chime HIGH
6 Temporal Chime LOW
7 5-Second Whoop HIGH
8 5-Second Whoop LOW
9 One Test Chime HIGH
7089dim1.tif