Kenwood KDC-X598 - Manual (Page 13)

13 ENGLISH |
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH®
Bluetooth mobile phone
To Do this
Receive a call Press or the volume knob or one of the
number buttons (1 to 6) (or press on
RC-406).
• All the buttons and display flash when there
is an incoming call.
During a call, the buttons and display
illuminate according to the settings made for
[DISPLAY]. ( 18)
• When [AUTO ANSWER] is set to the selected
time, the unit answers incoming call
automatically. ( 14)
Reject an incoming
call Press B SRC (or press on RC-406).
End a call Press or B SRC (or press on RC-406).
Switch between
hands-free and
private talk modes Press 6 IW during a call.
• Operations may vary according to the
connected Bluetooth device.
Adjust the phone
volume Turn the volume knob during a call.
Phone
volume: [00] to [35] (Default: [15])
• This adjustment will not affect the volume of
the other sources.
Switch between two
connected phones Press repeatedly.
• Not applicable during a call.
Improve the sound quality during a call
While talking on the phone...
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
3 Press and hold to exit.
To return to the previous setting item or hierarchy, press .
Default: XX
MIC GAIN –20 — +8 (0): The sensitivity of the microphone increases as the
number increased.
NR LEVEL –5 — –20 (–10): Adjust the noise reduction level until the least noise is
being heard during a phone conversation.
ECHO CANCEL 1 — 10 (4): Adjust the echo cancellation delay time until the least echo
is being heard during a phone conversation.
Text message notification
When the phone receives a text message, the unit rings and “SMS
RECEIVED” appears.
• You cannot read, edit, or send a message through the unit.
• To clear the message, press any button.
Use Voice Recognition
1 Press and hold to activate Voice Recognition.
The connected phone (which has been paired the earliest) is
activated. However, if priority device is connected, pressing and
holding
activate the priority device. ( 15, DVC PRIORITY)
2 Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of
iPhone.
EN_KDC_X598_KWK0_f.indd 13 EN_KDC_X598_KWK0_f.indd 13 11/11/2013 12:24:51 PM 11/11/2013 12:24:51 PM