Kenwood DDX5901HD - Manual (Page 72)

72
❏ USB
“Reading...” does not disappear from the screen.
• Turn the power off and on again.
While playing a track, sound is sometimes
interrupted.
• The tracks are not properly copied into the USB
device. Copy the tracks again, and try again.
Tracks are not played back as you have intended
them to play.
• Playback order may differ from the one played
back using other players.
❏ iPod/iPhone
No sound comes out of the speakers.
• Disconnect the iPod/iPhone, then connect it again.
• Select another source, then reselect “iPod”.
The iPod/iPhone does not turn on or does not
work.
• Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
• Reset the iPod/iPhone.
Sound is distorted.
• Deactivate the equalizer either on this unit or the
iPod/iPhone.
A lot of noise is generated.
• Turn off (uncheck) “VoiceOver” on the iPod/
iPhone. For details, visit <http://www.apple.com>.
No operations are available when playing back a
track containing Artwork.
• Operate the unit after the Artwork is loaded.
Videos cannot be played.
• Connect with USB Audio and Video cable
KCA-iP202 for iPod/iPhone except for iPhone
5/iPod touch (5th Generation)/iPod nano (7th
Generation) or KCA-HD100 and USB2.0 cable
through Lightning-Digital AV adapter for iPhone
5/iPod touch (5th Generation)/iPod nano (7th
Generation) . Other cables cannot be used.
No sound of videos comes out.
• Connect with USB Audio and Video cable
KCA-iP202 for iPod/iPhone except for iPhone
5/iPod touch (5th Generation)/iPod nano (7th
Generation) or KCA-HD100 and USB2.0 cable
through Lightning-Digital AV adapter for iPhone
5/iPod touch (5th Generation)/iPod nano (7th
Generation). Other cables cannot be used.
❏ Tuner
AME automatic presetting does not work.
• Store stations manually. (Page 25)
Static noise while listening to the radio.
• Connect the antenna firmly.
❏ AV-IN1/AV-IN2
No picture appears on the screen.
• Turn on the video component if it is not on.
• Connect the video component correctly.
❏ HD Radio reception
Sound quality changes when receiving HD Radio
stations.
• Fix the reception mode either to [DIGITAL] or
[ANALOG]. (Page 27)
No sound can be heard.
• The HD Radio reception mode is not appropriate.
Select the appropriate mode from [DIGITAL],
[ANALOG] or [AUTO].
❏ iHeartRADIO/Pandora (Only
for DDX8901HD/DDX7701HD/
DDX5901HD )
The application does not work.
• The application on your iPod touch/iPhone/
Android is not the latest version. Update the
application.
❏ Bluetooth
Phone sound quality is poor.
• Reduce the distance between the unit and the
Bluetooth mobile phone.
• Move the car to a place where you can get a better
signal reception.
The sound is interrupted or skipped while using a
Bluetooth audio player.
• Reduce the distance between the unit and the
Bluetooth audio player.
• Disconnect the device connected for Bluetooth
phone.
• Turn off, then turn on the unit.
• (When the sound is not yet restored) connect the
player again.
The connected audio player cannot be
controlled.
• Check whether the connected audio player
supports AVRCP (Audio Video Remote Control
Profile).
Bluetooth device does not detect the unit.
• Search from the Bluetooth device again.
REFERENCES
DDX_Mid_K.indb 72 2014/01/23 15:45