General troubleshooting, Page|10 – Avenview DVI-C5-M-SET User Manual
Page 10
Page|10
www.avenview.com
6.
GENERAL TROUBLESHOOTING
PROBLEM
POSSIBLE SOLUTION
NO IMAGE
Check if cables connection to the source and the display are correct.
Ensure that display device supports 480p, 720p and 1080p resolution
SCREEN DEFECTS
APPEAR
This product supports up to 1080p resolution.
Check the HDMI connection
If outputting from a PC. Check the maximum resolution range of the
graphics card.
Check the resolution of display equal to to resolution output of the
graphics card.
LEARN EDID TO
TRANSMITTER
(Only From Example 5)
To learn the EDID of HDMI display for respective resolutions signals.
Connect the HDTV to the HDMI local output via HDMI cable
Set pin#1 at on [] first then connect the HDMI input to HDTV
through a HDMI cable. Wait for 20 seconds. The EDID learning
procedure will be finished. If you want to learn the EDID from another
HDTV, you must set pin#1 at off [] first and repeat this procedure
.