Freezer calendar, Ice pack, Ice cube tray – Siemens GS29NVW30 User Manual

Page 33: En 33

Advertising
background image

en

33

Note
If too much drinking water is added,

the function of the ice maker may be

impaired. The ice cubes cannot

be removed individually from the ice

tray. Too much drinking water was

added and is running into the storage

container, causing any ice cubes

to freeze together.

2. Pour drinking water into the filler

opening.

3. Re-insert water container.
4. When the ice cubes are frozen, press

lever down and release.

The ice cubes loosen and fall into

the storage container.

5. Pull out storage container and remove

ice cubes.

Freezer calendar

Fig. )/A
To prevent the quality of the frozen food

from deteriorating, do not exceed the

storage duration. The storage period

depends on the type of produce. The

figures next to the symbols indicate

the permitted storage period of

the produce in months. In the case

of commercially available frozen food

observe the date of manufacture or use-

by date.

Ice pack

Fig. )/B
If a power failure or malfunction occurs,

the ice packs can be used to slow down

the thawing process. The longest

storage time is obtained by placing

the ice pack on the food in the top

compartment.
To save space, the ice pack can be

stored in the door compartment.
The ice packs can also be used to cool

food temporarily, e.g. in a cold bag.

Ice cube tray

Fig. *
1. Fill the ice cube tray ¾ full of drinking

water and place in the freezer

compartment.

2. If the ice tray is stuck to the freezer

compartment, loosen with a blunt

implement only (spoon-handle).

3. To loosen the ice cubes, twist the ice

tray slightly or hold briefly under

flowing water.

Advertising
This manual is related to the following products: