Changing the basic settings, Switch on the grill, Set the desired value on the settings range – Siemens ET475MU11E User Manual

Page 19: Touch the 0 symbol for 4 seconds, Switching off without saving, Care and cleaning, M risk of burns, M risk of electric shock, Cleaning the appliance, Do not use these cleaning agents

Advertising
background image

19

Changing the basic settings

The grill must be switched off.

1. Switch on the grill.
2. Within the next 10 seconds, touch the

0

symbol for 4

seconds.

™ƒ

flashes in the left-hand display and

ƒ

appears in the right-

hand display.

3. Touch the

0

symbol repeatedly until the desired indicator

flashes in the left-hand display.

4. Set the desired value on the settings range.
5. Touch the

0

symbol for 4 seconds.

The setting is saved.

Switching off without saving
To exit the basic setting, switch the appliance off at the main
switch. Changes are not saved.

Care and cleaning

In this chapter you will find tips on how to maintain and clean
your appliance correctly.

ã=

Risk of burns!

The appliance becomes hot during operation. Allow the
appliance to cool down before cleaning.

ã=

Risk of electric shock!

Do not use high pressure washers or steam cleaners to clean
the appliance.

Cleaning the appliance

Clean the appliance after each use, once it has cooled down.
This will help prevent residues from burning on. Once residues
have burned on several times, they become more difficult to

remove.
Do not scrape burnt-on residues off, but leave them to soak in

soapy water.
Remove the wire rack and swivel the heating element upwards.

Remove the lava stone tray with the lava stones.

Do not use these cleaning agents

Scouring or chemically aggressive cleaners

Acidic cleaners (e.g. vinegar, citric acid, etc)

Cleaners containing chlorine or with a high content of alcohol

Oven cleaner

Hard and scratchy sponges, brushes or scouring pads

Thoroughly wash out new sponge cloths before using them.

Appliance part/

surface

Recommended cleaning

Wire grilling rack

Remove rough residues with a wash-
ing-up brush. Soak the wire rack in the
sink. Clean with a washing-up brush

and washing-up liquid and dry thor-
oughly.
Brush stubborn dirt with our grill
cleaner gel (order no. 463582) and
leave to act for at least 2 hours, or

overnight in severe cases. Then rinse
thoroughly and dry. Note the packag-
ing instructions of the cleaner.
Do not clean in the dishwasher!

Lava stone tray
and grill container

Remove lava stones or drain water.
Clean in the sink with water and wash-
ing-up liquid using a washing-up brush;

dry with a soft cloth. Leave stubborn
dirt to soak or remove with our grill
cleaner gel (order no. 463582).

Lava stones

Dry very damp lava stones occasion-
ally in the oven at 200°C. This can

help prevent the formation of mould.
Replace lava stones when they

become black. The lava stones may
be fully saturated with fat and could
generate a lot of smoke during use or

the fat could catch fire.
You can obtain the correct lava stones

from your specialist retailer (order no.
LV 030 000). When topping up,
ensure that the grill element does not

lie directly on top of the lava stones.

Control panel and
glass ceramic

cover

Clean with a soft, damp cloth and
some washing-up liquid; the cloth

should not be too wet. Dry off with a
soft cloth.

Appliance part/

surface

Recommended cleaning

Advertising