Axis Communications Video Encoder AXIS Q7401 - Manual (Page 7)

AXIS Q7401 Installation Guide Page 7
ENG
LISH
AXIS IP Utility - single camera/small installation
AXIS IP Utility automatically discovers and displays Axis devices on your network. The application
can also be used to manually assign a static IP address.
Note that the computer running AXIS IP Utility must be on the same network segment (physical
subnet) as the AXIS Q7401.
Automatic discovery
1. Check that the AXIS Q7401 is connected to the network and that power has been applied.
2. Start AXIS IP Utility.
3. When the AXIS Q7401 appears in the window, double-click it to open its home page.
4. See page 9 for instructions on how to assign the password.
Set the IP address manually (optional)
1. Acquire an unused IP address on the same network segment as your computer.
2. Select the AXIS Q7401 in the list.
3. Click the button Assign new IP address to selected device and enter the IP address.
4. Click the Assign button and follow the instructions.
5. Click the Home Page button to access the video encoder’s web pages.
6. See page 9 for instructions on how to set the password.