3 post-installation instructions -12, 3 post-installation instructions – Acer ALTOS 1100E User Manual
Page 58
Advertising
Altos 1100E Series User’s Guide
2-12
2.6.3
Post-installation Instructions
Observe the following procedures after installing a system component:
1. Check that the components are installed according to the instructions in their
respective sections.
2. Make sure you have set all the required jumpers. See section 2.4 for the correct
jumper settings.
3. Replace any expansion boards or peripherals that you removed earlier.
4. Replace the system cover.
5. Connect the necessary cables and turn on the system.
Advertising