Kenwood M-616DV-W - Manual (Page 26)

26
M-616DV
Clock/timer operation
Timer setting
The system can switch on to DVD, USB, TUNER or iPod
automatically at a preset time, serving as an alarm to
wake you up.
Important!
Before setting the timer, ensure that the clock is
set correctly.
1
Press CLOCK/TIMER button repeatedly to select
"SETTIMER" and press ENTER button.
"ON TIME" is flashing.
2
Press ENTER button to set the time for on time.
The hour indication starts flashing.
3
Press ¢ or 4 button to set the hours and
press ENTER button.
The minute indication starts flashing.
4
Press ¢ or 4 button to set the minutes and
press ENTER button.
"ON TIME" is flashing.
5
Press ¢ or 4 button to select "OFF TIME"
and press ENTER button.
"OFF TIME" is flashing.
6 Repeat the steps 3 and 4 to set the off time.
The icon " " appears.
7
Press
¢ or 4 button to select "SOURCE"
and press ENTER button.
"SOURCE" is flashing.
8
Press INPUT SELECTOR button or CD/DVD 6,
iPod/iPhone 6, USB 6, or TUNER/AUX 6
button to select the desired source and press
ENTER button.
The source switches as follows :
"TUNER"
= "DISC" = "USB" = "IPOD" = "TUNER"
=…
When TUNER is selected, select the preset station
number after the above.
Clock setting
1 Press CLOCK/TIMER button.
"SETCLOCK" appears and "CLOCK" starts flashing.
2
Press ENTER button.
The hour indication starts flashing.
3
Press 4 or ¢ button to set the hours and
press ENTER button.
The minute indication starts flashing.
4
Press 4 or ¢ button to set the minutes and
press ENTER button.
⁄
• The clock setting will be erased when the power cord is
disconnected or a power failure occurred.
M616DV_12th.indd 26 M616DV_12th.indd 26 11.7.6 0:05:41 PM 11.7.6 0:05:41 PM