Hands-free control, Registering bluetooth, Unit pin code (p.62) – Kenwood DNX7210BT User Manual
Page 32: Setting up the hands-free phone (p.63), P.62), Et up output
62
62
63
Registering Bluetooth unit PIN
code
You can set the PIN code to the Bluetooth
unit. The code is acquired when registering
(pairing) from the cell-phone or audio player
side.
1
Touch [SET] of [Receiver PIN Code] in
the Bluetooth SETUP screen.
Receiver PIN Code Set screen appears.
2
Enter a code number and touch
[Enter].
NOTE
• If you want to cancel the registration, touch
[Cancel].
• If you want to clear the entered number, touch
[Clear].
Bluetooth output setup
You can select speakers to output the sound
from cell-phone (such as phone call voice
and ringing tone) and Bluetooth audio
player.
1
Touch [Front Only] or [All] of
[Bluetooth HF/Audio] in the Bluetooth
SETUP screen.
Front Only
Outputs from the front speakers.
All
Outputs from all speakers.
Hands-Free Control
You can perform various setup about hands-
free function.
1
Press the <TEL> button.
Hands Free screen appears.
2
Touch desired key in the Hands Free
screen.
See the following section for each setting.
• Set up the Hands-Free system
• Set up SMS
Setting up the Hands-Free
phone
1
Touch [TEL SETUP] in the Hands Free
screen.
Hands Free SETUP screen appears.
2
Set each item as follows.
Auto Response*
1
Sets an automatic response time to pick-up an
incoming call.
OFF (Default): Automatic response is not
available.
0-99: Set calling ring time (second).
Call Beep
Select whether to beep at an incoming call.
ON (Default): Beeps.
OFF: Not beeps.
SMS Receive Beep
Select whether to beep at an incoming SMS.
ON (Default): Beeps.
OFF: Not beeps.
Phone Information Use
Sets whether to download phonebook for
outgoing, incoming and missed calls list.
ON (Default): Yes.
OFF: No.
SMS Use
Select whether to use SMS.
ON (Default): Uses SMS.
OFF: Not uses SMS.
Sort Order
Sets how to arrange the cell-phone
phonebook.
First: Arranges in the order of first name.
Last (Default): Arranges in the order of last
name.
Echo Cancel Level
Adjusts the level of echo cancellation.
Default is “0”.
Microphone Level
Adjusts the sensitivity of the telephone
microphone. Default is “20”.
Noise Reduction Level
Reduces the noises generated by surrounding
environment without changing the
microphone volume. Use this setting when the
voice of caller is not clear. Default is “0”.
[Restore]
Resets the settings to the default settings.
*1 Either the time interval for automatic
answer set on this unit or the time interval
set on the cell-phone, whichever is shorter
takes effect.