Kenwood TK-2360E - Manual (Page 22)

4
TEMPOrAry CHANNEl lOCKOUT
During scan, you can temporarily remove specific channels
from the scanning sequence by pressing the key programmed
as Scan Temporary Delete while Scan is paused at the
undesired channel .
• The channel is no longer scanned. However, when scanning is
ended and restarted, the channels are reset and deleted channels
will again be in the scanning sequence.
SCAN rEvErT
The Scan Revert channel is the channel selected when you
press the PTT switch to transmit during scan. Your dealer can
program one of the following types of Scan Revert channels:
• Selected: the last channel selected before scan .
• Selected + Talkback: same as “selected”, plus you can
respond to calls on the channel at which scan is paused.
• Priority: the priority channel .
• Priority + Talkback: same as “priority”, plus you can
respond to calls on the channel at which scan is paused.
• Last Called + Selected: The last channel on which you
receive a call or the last channel selected before scan,
whichever operation occured latest.
FleetSync: AlPHANUMErIC 2-WAy PAGING FUNCTION
FleetSync is an Alphanumeric 2-way Paging Function, and is a
protocol owned by Kenwood corporation .
Note: your transceiver functions include either Fleetsync or 5-tone
signaling {page 6}, but not both .