Troubleshooting, Amplifi er/ speakers, Tuner – Kenwood K-521-B User Manual

Page 69

Advertising
background image

69

English

Troubleshooting

Whenever the system is not operating as expected, check the following tables to see if you can

resolve the problem yourself before requesting service.

Symptoms

Solution

Ref. page

Amplifi er/ Speakers

Symptoms

Solution

Ref. page

Tuner

No sound output

Check all connections as described in <Connecting the

z

System>.
Increase the volume.

z

Cancel the MUTE setting.

z

Unplug any headphones plugged into the main unit.

z

10-13

20
20
13

[STANDBY/TIMER] indi-
cator is fl ashing red and
there is no sound.

One of the speaker cords is short-circuited. Unplug the

z

power cord and then reconnect the speaker cord.
There may be an internal problem. Turn off the power to

z

the main unit, unplug the power cord and request repairs.

No sound from the
headphones

Check that the headphone plug is inserted correctly.

z

Increase the volume.

z

Cancel the MUTE setting.

z

13
20
20

There is no sound from
"D-IN".

Check all connections as described in <Connecting the

z

System>.
Check whether "PCM" is selected for the digital audio

z

output setting on the connected component.

13

No sound from one of
the speakers

Check all connections as described in <Connecting the

z

System>.
Check the volume balance for the left and right speakers.

z

10

56

The clock display is
fl ashing.

Set the clock as described in <Setting the System Clock>.

z

64

The timer does not
work.

Set the clock as described in <Setting the System Clock>.

z

Set a start time and end time for the program timer.

z

64
59

No radio reception

Connect the antennas.

z

Select the broadcast band (AM or FM).

z

Tune the radio to the frequency of the desired station.

z

10
33

32-35

Interference (noise)

Install an outdoor antenna away from roads.

z

Turn off any electrical appliances that may be causing

z

interference.
Move the system away from the TV.

z

I have used Auto Mem-
ory and pressed the
[P.CALL] key, but I still
can't get radio recep-
tion.

Run Auto Memory again.

z

Manually preset stations with frequencies that you can

z

receive.

34
35

K-521E_B60-5813-08_01_GVT0294-002A.indb 69

K-521E_B60-5813-08_01_GVT0294-002A.indb 69

09.10.26 4:32:02 PM

09.10.26 4:32:02 PM

Advertising