Kenwood C-515BT - Manual (Page 19)

English
19
Using the Bluetooth audio
You can listen to audio fi les stored in Bluetooth audio
player.
Before use (Pairing function)
You need to register your audio player and cell-phone
before using it with this unit.
1
Press D.AUDIO/iPod/Bluetooth button once or
more to select "Bluetooth".
2 Press PAIRING/STEREO/MONO [PAIRING]
button.
3
Search this unit from the pairing target device.
When the pairing target device (Bluetooth audio
player etc.) detects this unit, it displays "C-515BT".
4 Select and register this unit on the pairing
target device.
5 If the pairing target device requests entry of
the passkey, enter "0000".
" ", "CONNECTED" is displayed when pairing
completes.
⁄
• Once a device is paired with this unit, it is not necessary to
repeat the pairing operation. This unit can be connected
simply by selecting "C-515BT" from the list of the Bluetooth
device.
• Note that this unit is not capable of multi-pairing.
Playback of Bluetooth audio
1
Press D.AUDIO/iPod/Bluetooth button once or
more to select "Bluetooth".
2 Play the Bluetooth device.
Basic opertions
Operation type Operation
To stop playback Press STOP 7 button.
To interrupt
playback Press 6 button.
Press again to resume playback.
To search for a
particular passage
during playback Press and hold 4 or ¢ button for
more than 2 seconds.
To select a track/ file Press 4 or ¢ button in play or pause
mode.
⁄
• If the pairing target device does not support the AVRCP
profile, the device cannot be controlled from this unit.
Operate from the Audio player.
Playing an external component
An external component can be connected to AUX IN
of this unit and played back.
1
Connect an external component.
Connect an external component to the [AUX IN]
connector on the rear of this unit.
2 Press AUX button.
3 Start playing the connected external
component.
Using the AUX C-515BT
B60-5807-08_02_English.indd 19 09.6.17 9:04:50 AM